10 Best .22 Rifle For Beginner (2022 Updated)

Tipton Best Bore Brushes are the best quality I’ve found yet. Lasts twice as long as standard brushes.

I really like these brushes, especially the way they are fastened to their base with a loop. I’ve had too many other brushes come apart.

I also have other Birchwood steel targets which hold up very well and so i thought I’d try this one for. 22. With ammo prices still being quite high I shoot more. 22 and it’s always more fun to hear the “ping” of the steel and see something move than shooting paper all the time.

Paper splatter targets are around $1 each so you’re saving a LOT of money with a resettable target and probably having a lot more fun shooting it. You also don’t need to walk down range to reset it, just shoot the top plate to reset.

Works great! I may even pick up a second one to compete with whoever I bring to the range. Check out their higher caliber spinners too. My range has some steel but I bring these in case I can’t get a bay with steel or I just add it to what they have to change it up a bit.

Fun to shoot at. Spring guns and bb guns will “tink” but it won’t operate as intended unless you have a higher powered air rifle. Only complaint is that it is pretty small. Each target is about the size of a silver dollar.

The whole thing is maybe a foot tall.

I was concerned about the function of the product based on a video review. Fortunately, the product functioned poorly because it was set up incorrectly. The legs that fold out fold towards the front of the target.

This allows sufficient rotation of the lower targets to stay up until reset by the upper target. I have used the target at various ranges from 20 yrds to 40 yrds with a Benjamin maurader. 177, tuned to 830 fps muzzle velocity with a 10.

5 grain pellet. My usual targets are paper and cans. This target is more fun and provides the added benefit of minimal cleanup and no time wasted walking from the shooting station to replace the target.

The paper dots will soon disappear, but can be replaced with adhesive target dots or paint. Hint, it would be nice if these were available as an accessory. The target folds flat for easy storage. No signs of target damage.

Going to purchase 4 more and place them at various ranges.

It’s a Christmas present for someone else but it has just what is needed for normal service of a rifle. Size is ok. Not for everyday Cary in pockets but definitely in your range bag or rifle case. Sale price made it a must.

This is a good tool for the range bag or hunting kit. It is compact, reasonably light in weight and has a fair amount of leverage. The unit is strong enough for basic field maintenance but I would not try to use it for anything stuck or heavy.

The number of tools is however not 18. 1 Choke Tool. 1 Draw knife Blade 1 Pin punch, that can’t provide much force. 2 Allen wrench blades. 3 Torx Blades 4 Hex drive screw driver bits in a holder, with the driver.

That is 13 useful tools. The claimed scope windage tool is actually the tip of the choke tool and does not fit any scope I have. Overall, a good all in one tool at a fair price.

Fine kit with variant parts included to make one of several guns. Only complaint is that there is minimal customization options for the crew

The Mek Gun comes with a number of varieties to choose from to build. To build another Gun without buying a new boxed kit, the ultimate piece is the Mek Gun Kannon Body. It is the central piece that all of the different varieties of guns are built on.

Super fast shipping. Arrived in good condition. Highly recommended

The hole in the middle is for a handle which a case underneath could go. They don’t make this model anymore, so the hole remains. Does not really make a difference. You can cover the bottom if you like.

Other then that it is great! Cleaning my M4 is made so much easier then just using a table. I’m glade I bought it.

Great product. Works great for both my guns I have. I recommend this

IMR4227 is my powder of choice for 357M, 44M, 45 Colt, and 454 Casull. Yes, choosing different powders for each of these loadings can give slightly better performance in terms of muzzle velocity, accuracy, and burn; but this powder is an excellent choice for loading all these power handgun rounds.

All modern powders seem to be very stable across ambient conditions. Specifically, over a period of five years, an 8lb bottle of IMR4227 yielded extremely consistent performance loaded in rounds regardless of temperature and humidity.

I’m on my third bottle, ready to purchase the 4th.

Very versatile powder. I bought this powder to develop target and hunting loads for 44 cal. Marlin 1894 CB and a. 357 mag. Winchester 1873. Both with 24′ bbl. I needed a powder where I could really control the maximum velocity below 1500 FPS.

Some loads needed to be between 1100 – 1200 FPS. Some loads needed to be tween 1400 – 1500 FPS. That’s hard to accomplish with typical powders used with. 357 mag and 44 mag and get consistent accuracy out of longer battled rifles.

But the old fashioned IMR4227 really hits the mark.

12 gauge loads for trap, skeet and light field loads can be loaded with IMR 700x. I have used 700x since the early 1960s and it works great. To load 12 ga. Hibrass use the 800x. Either of these powders can also be used in the 16 ga For 20 and 28 gauge loads 800x is the best choice because the smaller the shotgun bore is, the slower the powder burn rate must be although 700x can be used in a 20 ga for target loads but data is no longer published.

As to the 410 bore, I use another brand of powder but I have used IMR 4227 with good results in the past. Today there are so many different powders available that it boggles the mind be they for rifle, shotgun and handgun.

I keep it simple and use IMR for shotguns. Be sure to consult a loading manual before reloading any type of cartridge.

The mantis x3 does what it is designed to do. Improve your accuracy. I recommend this for anyone who wants to improve their shooting skills and save money on ammo.

Great product for practicing without the cost of ammo. Easy to set up. Very user friendly.

Purchased this solution from Dean safe and could not be happier with purchase! Did a remodel on the interior of safe because whoever designed the inside of my safe obviously did not own guns. After the remodel I applied the Storage solution Velcro to the underside of my shelves, installed the rods in my guns, and almost doubled the number of guns in my safe.

they stay put too. Very nice to be able to select almost any gun in safe without having to fumble around in the pile. Highly recommend. I just bought the Browning 23 prosteel safe and I can actually get more than 23 guns in there.

(after remodel) Imagine that! going to buy 2 more of the 20 gun starter kits, and 1-10 pack of rods for my other 2 safes. Whoever thought this up was a genius!.

When I first received this item I was unsure if the rods were sturdy enough. They made me a believer because once they were put into use they were absolutely strong enough to hold all my rifles from the small in stature too the large bore keeping all of them from wiggling enough for the rifles too fall down.

The only wiggle that I found was minimal & that was on the large bore ones. Shipping was very fast & securely wrapped. The cost was very competitive if not lower then most of the companies that were carrying similar items.

This product is good enough that I recommended it to my son, brothers, nephews & friends. I would not be surprised that when my new safe comes in down the road I will be ordering another set. jrmc7711 {:-).

The rods are great!!! The sheet of velcro that the rods are supposed to attach to DOES NOT HAVE A ADHESIVE BACK TO IT!!! I TRIED 5 DIFFERENT GLUES TO TRY AND ADHEAR IT TO THE TOP OF MY GUN SAFE AND IT WOULD NOT STICK!!! I HAD TO PURCHASE A ROLL OF HEAVY DUTY VELCRO STRIPS TO STICK TO THE TOP OF THE SAFE.

ONLY THEN DID THE PRODUCT WORK!!!!.