20 Best 45 Acp Ar Pistol (2022 Updated)

They did a fantastic job with this. Because this is a combination I would still rely on leaving in a safe if you leave your house. But if you are home this is great to have for quick access but still secure the firearm especially if you have little kids.

Also, great for traveling with to the range/ hunting etc. I have two of these. One on my AR-pistol 5. 5in Saint PDW another on my 12 inch AR-15. Side note, if does fit on my AR-10 so I do use it on that as well.

Like I said this is great for traveling etc with or access when at home. It’s great because no one can grab your gun and use it while this is on it. (However, keep in mind if someone had an hour or two to try different combinations they can probably figure out the combination with effort.

) So nothing beats a safe for securing accessibility of a firearm. – Simple rule – if you aren’t home lock it up. If home and you have kids but need access to it use this.

I ordered two of these. Was thinking one could be a gift and the other for a rifle I was setting up to be close by at night. The product arrived and it is a nice product. Unfortunately for me it does not work on my rifle though.

There is a small notch where it is suppose to secure and it won’t allow the chamber lock to stay in the chamber. It does work on other rifles I have just not the one I bought it for. This is no fault of the company though.

Just bad luck on my part. Probably keeping the lock as I may just switch out the upper on the one I bought it for or just buy another rifle :-). Chamber lock is a good buy just beware that it doesn’t work on all chambers.

I would have given 5 stars if it would have worked on my rifle.

Price quality ratio very good.

Super guay

TranslateShow in original languageLa pistola y la sobaquera no se parecían en nada a la foto. De plástico y sin las tiras para poder sujetar al cuerpo. La pistola no encaja bien el la funda

The prop was purchased for combatives training and serves that purpose perfectly, will hit *most* holsters. Stiff enough for retention training and disarms. This is far from a soft rubber and will cause injury if used improperly.

If you want to practice your draw i would recommender a blue gun. The rubbery texture will cause drag in holsters. For combatives 10/10 !.

Use for basic firearm training principles: stance, grip, sighting, safety protocols Like to do this in classroom before taking folks out in range. This one has a realistic weight and sights with a distinct (though non-functional) trigger.

Works very well for our pipurposes.

Not as solid as other brands of training guns. It is more flexible and rubbery than expected but is still not a bad training aid for the price. The more expensive brands are more solid and will likely last longer.

Hardest thing was to decide whether to mount it horizontally or vertically. Adjustment for fitment of my AR and reprogramming the combination were pretty straightforward – instructions were very explicit.

The only trick was to make sure you drill a full 2 inches into the wall stud to prevent stripping the mounting screws. I didn’t drill the full 2 inch length and stripped one of the mounting screws. I removed a screw that I already installed and drilled the full 2 inches and installed it sliowly this time – not letting the drill jump.

I should have replaced the stripped screw but decided to salvage it by using a flathead driver instead of a phillips and installed it into the hole I removed a screw from – again slowly with a lot of my weight onto the drill/driver.

I recommend not stripping the screw int the first place. If you strip one – don’t take a chance and just purchase a couple of new ones- these are cheap from your local hardware store. This is the only option (aside from a full size rifle safe) that secures an AR15 but have the option of storing it loaded (not recommended) and with the bolt closed with a magazine fitted.

For the way I like to store my AR (action closed, magazine fitted and chamber empty) this is perfect. The ghostedskull vinyl sticker included was a nice touch. Really love this safe. The industrial grade combination lock (no keys or batteries ever needed) works flawlessly- just fantastic not having to be concerned with keys or keeping an eye on the battery life -lest you lose access at an inopportune time.

Excellent company – they figured an affordable way to secure an AR with however way the owner wants.

Third purchase from this company and quite happy. Shotlock safe is a great gadget. It will never stop a burglar who has come with intent, but what will? It is mounted next to my front door and covered with a kimono.

It will stop walk in thieves, smash and grab burglars and children and guests.

Seems a little pricy for what you get but it was a spur of the moment purchase and the only gong target my local Cabela’s had in stock. Out of the box, my first impression was that this would work well for sighting in my new rifle.

However, it should be noted that what is pictured on the box is NOT what you get. The picture shows the target hanging from the stand with chain links that appear bolted to the target. With mine, this seems to have been replaced with ‘S’ shaped hooks.

This makes for a very quick and easy setup but my very first shot at this target shows why this change was a bad decision on the part of the manufacturer. From 200 yards my Hornady SST 7mm-08 120 gr.

round knocked the target completely off the stand. In fact, of the eight shots fired, half of them took the target at least partially off the stand. We spent more time putting the gong back in place than we did shooting.

My other complaint is that when set up the gong is only a few inches off the ground. The stand could have been taller given the size of the box. So, with that said, the gong itself is the only part that works as expected as I will have to make my own stand and mounts to make up for an expensive bad design.

Works out well. Had it at 220yards hiting it with .308 and 7mm rem mag. Not even a dent. Good visuals when you hit the plate it swings and disintegrates the bullet leaving a small cloud of dust

Product arrived quickly and was in perfect shape! Assembly was easy and plastic case was a pleasant surprise. After shooting with 22lr and 9mm there is no cratering whatsoever. 22lr does not have enough weight to flip targets from side to side, 9mm works great.

I said it’s a good value only because it gave me a starting point to modify it and make it work properly. I expected this to work out of the box but it seemed that no matter how I set this thing up I could not get all four bottom targets to stay ‘up’ on the horizontal re-set bar attached to the top ‘re-setting’ target.

The first two shots would get the first two targets to stay up but then the 3rd shot would usually cause one of the first two to fall back down when that 3rd target hit the horizontal bar. A couple times I was able to get 3 targets to stay up but the fourth target hitting the re-set bar would always cause at least one more to slip off.

I’m a mechanic/machinist and looking closely I could see that the problem was there was way too much slack or slop in all the parts. The product could be improved greatly by having the targets welded to a smaller I.

D. tubing (or using larger frame material) so they don’t swing side-to side as much and also by putting the welds on the main frame closer to the target tubing and tightening up all the tolerances. To fix mine and make it work (it works great now) I put several spot welds real close to each side of the tubing the targets hang from so they can’t move sideways and flop around as much.

I also painted the targets white whichworks better than the stick on paper ones. After 15-20 shots on each target they were starting to deform but I was able to hammer them flat.

The target paddles spin just fine, but do not stay up as advertised. The spacing must be wrong on the T-bar for the “reset” target on top, the lower two just push past it. That’s with a 9mm, nothing too high powered.

And the stickers flew off the first time I hit them. No point putting them on, paint would be better.

I bought this to use at a friends farm and it is as fun as plinking cans (almost) but without the pickup time it takes to reset the range. We shot this solo and as a friendly competition.

The bracket is sturdy. Note the back plate is only 1/4” The top plate is 1/2”. The back holes are drilled to permit screws into the center of any 2x material or greater, however the top hole screws will clear the top of any 2 x stud supporting the top plate.

If your brackets are mortised into your top plate as shown on the manufacturers product page then the #12 2. 5” screws included will go right though your top plate and stick out on either side of your stud.

Unfortunately the shanked threads purchase less than an inch of the top plate. Not a particularly robust arrangement…use 4x studs or 4 x top plate, offset your studs or/and use unshanked screws. The screws included by the way are poor quality, if you use them be careful to predrill and not to overtighten.

First one head broke right off.

Serves my purpose by providing the necessary strength/support that I was seeking. Would have given it 5 stars but the finish was imperfect. Had to spent time fixing that because in my application there is a non-obvious ability to see the bracket.

Ironworks did (to their credit) provide a partial credit for the damage after I provided photos.

I bought one for my exhusbands rifle for xmas and when I put it on his gun I bought one for my pistol. These look so amazing and turn a boring gun into a sweet looking gun. So many options to choose from! I watched the YouTube “how to” video a few times and it wasn’t to bad.

Definitely got better and easier the second time around. Going to buy another one for my shotgun!!.

The product is a 5 out of 5. Technical 4 out of 5My 1911 frame was full sized with large front and rear sights so it was a stretch to get full coverage. The final result is amazing. Took about 2. 5-3 hours.

(Sights). Blades are a must! I have wrapped mags and guns. It will give you a unique item with a little time and effort. Personalize it!!!I will be buying more!How about something in blue, not all girls are crazy about pink!!.

Thank you for producing this product. it gives the consumer an option that gives firarms a new look!! thank you for making these Gunskins ! Steve C.

Fantastic little shooter. Has the weight and feel of a real AR. Everything works just like the real deal including the bolt locking back when empty. Rapid loader works great as well. Of course it would be fun to have more than 25 rounds but man what fun for those 25.

I bought this for me and my daughter and it’s everything you’d want it to be. Put on the red dot and it was spot on from the beginning, no sighting in required, for mine at least. The fact that it works like an actual AR is good for training my daughter for the real thing.

She has one in 22 but cant shoot that in the back yard.

if it worked as it is supposed to, it would have been just ok. Only half of it works only one of the 2 cO2’s ports are functional. and when you change the co2’s one shoots all the pressure out that still in it because it doesn’t let the co2 get into the gun.

Junk and was very expensive also. what a disappointment.

The auto loader jams bb inside spring rendering it useless. Should have a better loading system for the price

Perfect fit on my double stack pistol magazines. Easy to install.

Easy way to mark my gun magazines!! Never lose a magazine again!

Great alternative to expensive end plates, hopefully they will survive the Texas heat.

i wanted a rimfire steel bobcat cutout target and this is the one. it is about as large as a typical north east bobcat although the toms do get bigger. i’ll use this as a test case for several approaches to a spot i have in order to test the shot as i’ll be at elevation.

as an engineer, i have to say that the cut edges of the target are actually beautiful. the cat silhouette is right, i can position height correctly with or without grass. although the cat leans forward just a little, i’ll just rip on the T stake a little to level it out.

Fun addition to the 100 yard range for. 22’s and iron sighted old west big bores, and useful at the 400 yard range for more serious stuff. Durable, and easy to set using metal T-stakes and the Twist-Loc.

Only reason I didn’t give it 5 stars is the sound is a little dull compared to others of your targets that I own. Don’t know why.

I’ve been buying steel here for quite a while. All my targets seem to hold up great and have been easy to set up. Great shipping timing and a very fair price. I recommend you get so. e now and start plinking!.

Very pleased, and this is a steal for the price. My only gripe is how hard it is to close the nozzle once inflated. Getting it inflated with breath alone is easy, but nozzle is on the butt of the bun, making it pretty much impossible to get a grip on the nozzle to keep air out.

I barley managed using a pair of needle nose pliers.

Hilarious add on to a costume and good for the money.

Worked great for our Purim gangster costume! Perfect size, held air all night.

I watched “Zyuden Sentai Kyoryuger” long before I watched “Power Rangers Dino Charge”, both of which are ‘Morphenomenal’! As soon as I received this product, I studied the choreography on how to use this (Kyoryu Change Henshin Dance), and BOOM; It felt as if I had transformed into one of the Kyoryugers.

While playing with this, I examined the Zyudenchi, each of which had their names & awesome details (just like from the show) that continue to take my breath away. The Saber that came with the Product was also very interesting, especially when it can fold up and connect to the GabuRevolver for more super effects! When “Power Rangers Dino Charge” premiered on TV, I studied the choreography on how it worked in that show, & I was on my way! I may not understand why they didn’t change this Product’s Zyudenchi names to English for the Power Rangers version, but nevertheless, I would definitely recommended this to those who are fans of the Power Rangers / Super Sentai series.

Your product is very nice when my mom buys it for me I will be very happy thank you

WE DID NOT RECEIVE THIS PRODUCT .!!!! BANDAI POWER RANGER .!!!! WERE STILL WAITING .!!!

Ok, so this is a very esthetically pleasing upper that mates up extremely well with a New Frontier lower (any generation), arguably better than New Frontier’s own upper, in terms of looks. The dust cover is an awesome functional additional that is also easy on the eye.

Tolerances may be a bit tight; one of my 9mm BCGs would bind up but that may have been the BCG itself. If you’re into the ST spider logo, well, they took care of you: it’s etched on top of the rear tab that covers the charging handle.

It’s a nice touch that sets the whole piece off nicely. And the price at JBO is nice. Git you won.

Joe Bob Outfitters has been one of my favorite places to buy gun goodies for quite a few years. Once again , they have not disappointed. Fast delivery and a great price, arriving in perfect condition.

Spike’s Tactical is my favorite for AR-15 builds, and this 9mm upper was flawless. It mated up perfectly with my 9mm Spike’s lower.

Showed up quickly. Finish is a perfect match with the spikes PC lower I have. Small spikes tactical logo on the rail above the charging handle. Had no issues the first day out. No unusual wear patterns after first cleaning.

Great purchase.

Straight forward experience. Nothing to complain about. Spice was also the only place to have a green radian (this is how I found them) and went for it. All I can say is I wasn’t sure about buying here but did.

And you can too. It’s a legitimate site and I’m leaving this review to encourage others to buy what they are looking for, right here at spice tac. The charging handle I ordered was what I got and it came in a timely fashion.

I don’t think I need to leave a review on the radian CH itself but it’s my 3rd one. I’m sure there are others that are great. And perhaps you don’t NEED an upgraded CH, but this is by far one of the best on the market, if not thee best.

If Spice tac has something you need, in stock. Go for it!.

Hands down the best charging handle I have ever used. But admittedly that is not saying much as my experience is limited just to the mil-spec and various BCM charging handles. One major aspect that sets this apart from other handles is that the Raptor does not rely on an inherently small latch which is largely surrounded by the handle body.

The problem with this (here’s to you BCM) is that when engaged, there is the potential that the operator may inadvertently pinch his/her finger in-between the latch and handle body. Because of this, hand placement becomes even more important.

I know, I know, it’s a training issue – get over it. Still worth noting nonetheless. Instead, the Raptor implements 2 large wings for its latches and was designed in such a way that prevents impingement with the operator’s hands and can be activated with gross motor skills.

Definitely a smooth operating handle that can be activated with a variety of hand gestures. Lastly (for the goods), the fit and finish is impeccable ─ what you’d expect from Radian (formerly AXTS). The only gripe I have with this handle is that the right latch is wobbly.

When taken off the rifle, there is quite a bit of vertical play but only when forced. When installed and freed from spring tension of the opposite side that latches into the receiver cutout, the right latch will jiggle with movement of the weapon system.

Not a huge deal, just an observation. Huge fan of Radian and what they do, will be purchasing more of their products long into the future.

I Was looking for these very desired items in various other places, to no avail! And I came upon them here at Spice Tac just exactly what I was looking for! everywhere else I went too was out and on backorder, bummer man! I was very surprised and extremely excited to find it here, so ordered it, one place told me it would take a few months I get my items, But Spice Tac not only had exactly what I needed the service was outstanding, and fast, very profesional! I would most definitely continue to look for my tactical needs here! Thanks Family.

Although, I love my new Remington R1 Enhanced, it was having problems feeding, from the get go, especially, with 200 grain Sig Elite Performance V-Crown (JHP) ammo, which wouldn’t feed at all. This Sig ammo is a bit shorter, and blunter, in the nose, than 230 grain.

After much internet searching, and calls, to Remington, I settled upon changing the stock mag’s, and stock extractor, to Wilson Combat’s. Poof – no more failure to feed issues. The extractor will drop right in, with only a minor tweak, to the tension.

This extractor is being kept as a spare for my Colt Series 80 type 1911. I’ve used Wilson-Combat Bullet Proof model extractors before. They generally only need a tensioning adjustment and no extra filing of the hook area.

I’ve had one break its hook over the years, but I’ve also broken Kimber and Ed Brown extractors. I had one Wilson-Combat extractor which had its firing pin stop’s slot machined just a bit off. I had to return that one to the vendor from which I bought it (not this vendor).

I’ve tried EGW HD extractors but after many attempts at fitting, I just couldn’t get the hook & tension exactly right. I often use Wilson-Combat parts in my 1911 guns when various replacements are needed.

Had a little trouble fitting this. Called Wilson Combat and they helped me for it to my Colt 1911. Would buy another one anytime.

A neighbor bought this for a 458 bear creek Arsenal SOCOM. When I had a chance to use it I was so impressed I bought one for my 458 and then for every rifle I have. Solid product with QD sling attachment.

Not sure why tan costs more. Fits nice and tight on a mil-spec tube. I think My tubes are all palmetto state for the most part. The tan is proper color and not soft off shade for FDE. This is exactly what you need for that soft gentle shoulder you have.

Great stock with a nice butt pad that provides a lot of cushion. The hex pattern in the butt pad matches well to a Kryptec paint scheme and a few of the hex-molded products from Strike Industries. Sling swivel is reversible.

You might have to clean up mold lines along the top where your cheek goes, but this is simple to do with an xacto knife. The stock also disassembles easy, including the butt pad which is held on by two screws.

This makes it very easy to paint without having to mask things off. Cerakote C (air dry) adhered to the plastic fine after cleaning off lubrication from the factory using soap and then spraying with Brake Kleen.

Very good works just like the real one I used to have. Update. Except the barrel dimensions is not. 45 caliber or 11. 5 mm. And the revolving chamber is a lot smaller than. 45caliber. This is the only thing I dont like.

Its a very good quality replica that doesnt break your wallet. Made out of steel, it feels and weighs like the real Colt 1873 Peacmaker revolver. It will look good as a museum piece or for your collection.

Gun is great but the cAPS ARE TRASH, THEY DON’T FIRE LIKE THEY ARE SUPPOST TO. iT SEEMS THEY FIRE EVERY 3RD OR 4TH SHOT. gET BETTER CAPS

Works pretty good ! It closed my groups from hand size too fist size at 75 yards !!! Easy to use just get a good even seat all away round and your good to go. Didn’t help as much with the others but it did improve them.

Anything that makes them better is great glad i got it !!!.

I bought the right product for the wrong project by mistake. So I haven’t had a chance to use it yet. However, I do like the design and the simplicity of the tool. It’s a bit heavy but feels and looks durable.

Worked as described. The first few seconds of hitting the drill trigger showed me how out of square my “expensive” upper was, the next 3 minutes made it square. I really is that easy. DO NOT SPEND TOO MUCH TIME LAPPING, It only takes moments, stop when you get a conolete circle of silver and DO NOT use the drill’s fastest setting.

Not too much lapping media is needed either, just use a Q-tip to cover the lapping part of the tool.

Bad set of dies. They have been returned to Lyman. These dies are undersized to the point about half the cases I attempted to full length resize stuck in the die. I got good at drilling, taping and extracting cases.

I even used Imperial Sizing Wax and still got a stuck case. The dies won’t even allow neck sizing with out sticking cases, I back out the die a full turn and stuck a case. Dies were received without a shell holder and the case was broken.

Lyman replaced the case and gave me a shell holder. I bought a new set of dies and they work without issue. I’ve been reloading for over 50 years and this is the first set of dies where I’ve had this issue.

I have not heard back from Lyman on the returned dies.

I bought an RCBS die set for my reloader and it never resized the neck down. That was the first RCBS dies that I had ever bought. I had always used Lyman dies. I called RCBS to talk to them about the die not resizing the Shell right and they said that since I had bought the shells from browning that had already been once fired that was the problem is because I didnt shoot those shells out of my rifle.

I explain to them that each shell that I had bought had been fired through a different gun and they still tried to tell me that because it wasnt shot out of my gun was the reason that our RCBS die wasnt resizing the casings.

I said are you serious the dies should re-size any of them because Browning shoots one shell out of each gun before they sell it and for 100 shells being bad is not possible. In short I could not make them understand or comprehend anything that I was saying.

I finally told the girl that was trying to help me that she hasnt re-loaded a single round in her life and I have been reloading ammunition longer than she has been alive. I bought the Lyman which I knew was good quality and that I shouldve bought it in the first place.

I suggest to anyone to get Lyman dies. Because I have never had a problem out of them!.

Works better with resizing wax than spray. Easy to use. Full length resizing die does a nice with the. 002 shoulder bump. I have 4 different brands of dies. Just read the instructions. They are all a little different.