17 Best Carbide Woodturning Tools (2022 Updated)

STRONG AND DURABLE MATERIALS Lathe tools include a rougher, two finishers and a draftmaker, which make it quick to work anything on your lathe. Each of them is composed of quality alloy tree, beech handle and sharp carbide tip, providing long service life.

CLEAN AND PRECISE BLADES The wood lathe tool set will provide smooth and clean cuts with 4 types of knives together which are designed for different grinding effects. Above all, this saves you a lot of time on grinding and grinding as you can easily replace these blades when they become blunt.

ERGONOMIC DESIGN The wood lathe tools are designed with curved shaped handles that fit your hand well and relieve fatigue during long time work. EASY TO USE The set of wood turning tools ensures good configuration and entry-level use.

It is made exactly for you, a beginner missing confidence or a craft enthusiast needing an alternative option to complete your tools. Wide application: the delicate wood scissors on the lathe allow you to cut V grooves, curve and handle and sculpt lines.

The Ci1 Easy Rougher is a carbide cutter woodturning tool that addresses fatigue, safety, and efficiency like no other type of tool on the market. It is designed to effortlessly hog away massive amounts of material for any woodturning process without the need for sharpening.

The tool design provides support directly beneath the cutting edge transferring the cutting pressure downward allowing the lathe to “take the pounding” that you would normally suffer through when using a conventional bowl gouge for roughing.

No more “white knuckling” a bowl gouge. Cuts left, right and straight in without changing approach angle Truly deeper cuts up to 1″ off the diameter in one pass Requires very little physical strength or exertion Your feet and hips stay in nearly the same position for the blank roughing process Very minimal handle bouncing on irregular shaped blanks Reduced kick-back or sucking into work piece Chip Deflector keeps most projectiles away from the face and neck No intimidating cutting angles to learn and remember No bevels to ride No fear of a dangerous catch The Ci1 tool bar is CNC machined from solid stainless steel bar stock and is 11″ overall length.

It is turned down to a 1/2″ diameter x 2-1/2″ long to receive a handle. The same Ci1 accepts either the crowned cutter or square cutter. The crowned cutter excels at spindle roughing and finishing and working inside bowls.

Choose the square cutter for cutting square shoulders such as tenons on bowls and spindle work. For maximum efficiency, have a tool for each cutter.

The Ci1 Easy Rougher is a carbide cutter woodturning tool that addresses fatigue, safety, and efficiency like no other type of tool on the market. It is designed to effortlessly hog away massive amounts of material for any woodturning process without the need for sharpening.

The tool design provides support directly beneath the cutting edge transferring the cutting pressure downward allowing the lathe to “take the pounding” that you would normally suffer through when using a conventional bowl gouge for roughing.

No more “white knuckling” a bowl gouge. Cuts left, right and straight in without changing approach angle Truly deeper cuts up to 1″ off the diameter in one pass Requires very little physical strength or exertion Your feet and hips stay in nearly the same position for the blank roughing process Very minimal handle bouncing on irregular shaped blanks Reduced kick-back or sucking into work piece Chip Deflector keeps most projectiles away from the face and neck No intimidating cutting angles to learn and remember No bevels to ride No fear of a dangerous catch The Ci1 tool bar is CNC machined from solid stainless steel bar stock and is 11″ overall length.

It is turned down to a 1/2″ diameter x 2-1/2″ long to receive a handle. The same Ci1 accepts either the crowned cutter or square cutter. The crowned cutter excels at spindle roughing and finishing and working inside bowls.

Choose the square cutter for cutting square shoulders such as tenons on bowls and spindle work. For maximum efficiency, have a tool for each cutter.

Replacement inserts for all of the Easy Wood Tools. Be sure to double check for the correct size, it is engraved on your tools shank!

Authentic Ci3-NR 6400NR Patented Negative Rake Round Description nThis is a Authentic EWT Ci3-NR round negative rake carbide cutter designed to fit the Easy Start Finisher, Easy Finisher Mini & Mid Size, Easy Hollowers Full & Pro.

Negative rake cutters have been shown to produce better cuts in man-made acrylics, hard exotic woods and end grain. This also have longer edge lift. Beware of cheap imitations of carbide cutters. Authentic EWT cutters have the optimal 3Gs of Carbide – Grade, Grind, and Geometry.

1 The Right Grade: Carbide is basically a mixture of tungsten powder and cobalt that is fused together under high pressure and heat. The ratio of cobalt to tungsten and the size of the tungsten particle are referred to collectively as the grade.

There are literally hundreds of thousands of conceivable grades and no one grade of carbide is suited for all applications whether wood cutting or metal cutting. The perfect combination of cobalt and grain size in Authentic EWT.

The swan neck shaft of our Carbide Hollowing Tool is specially contoured for making blind cuts and undercuts inside of turned vessels. Like our other carbide turning tools, it features a replaceable, rotatable cutter that does away with the hassle and downtime of sharpening.

Just rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges are dull. Ideal for beginning to advanced woodturners, ensuring quick success without the frustration of dull tools, and without the need to invest in sharpening equipment.

Features: Contoured swan neck reaches inside of turned vessels to hollow and smooth the inside surfaceSolid carbide cutter stays sharp for longer when compared with steel for a longer useful lifeShaft features a flattened back for stability when using the tool restHandle is made of solid ash encased in thick, molded rubber end for enhanced grip and reduced fatigue | Rockler Full-Size Ergonomic Carbide Turning Tool, Hollowing.

Take a close look at the edge of this carbide cutter and you’ll realize it’s not actually square. Instead, each of its four edges is slightly crowned with a 2” radius. This subtle change makes the cutter excellent for smoothing cuts.

The replaceable, rotatable cutter eliminates the hassle and downtime of sharpening. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all edges have grown dull. Solid carbide stays sharp for longer when compared with steel, giving you a much longer useful life.

The shaft features a flattened back for stability when using the tool rest, and the handles are made of solid ash encased with a thick, molded rubber end for an enhanced grip and reduced fatigue. They’re great for beginning to advanced woodturners, ensuring quick success without the frustration of dull tools.

Since you don’t need to invest hundreds of dollars into sharpening equipment, they’re also an excellent value. Features: Excellent for smoothing cuts and convex surfacesTotal overall length of approximately 19-1/2” provides the leverage needed for heavy workNo sharpening needed, thanks to the replaceable, rotatable carbide cutterAsh handles are coated with a soft, grippy rubber for a secure, effortless grip and excellent ergonomics | Rockler Full-Size Ergonomic Carbide Turning Tool, Square Radius.

Wood Turning Tools For Lathe, Carbide Lathe Tools 4 Pcs, Turning Lathe ChiselsnMGCDMBSJT00000001V0 Wood Turning Tools For Lathe Carbide Lathe Tools 4 Pcs Turning Lathe Chisels TOUGH DURABLE The lathe tools include a rougher two finishers and a detailer which make quick work of anything on your lathe.

Each one of them is made up of a quality alloy shaft a beech handle and a sharp carbide tip featuring long service life. SHARP ACCURATE The wood lathe tools set will provide smooth and clean cuts with 4 types of cutters together which are designed for different grinding effects.

Importantly it saves you a bunch of time on grinding and honing because you can easily replace these blades when they get dull. ERGONOMIC DESIGN The wood lathe turning tools are designed with handles of a curved shape that fits your hand well and relieves the fatigue during a long time working.

EASE OF USE The woodturning tools set ensures a good entry level setup and use. It is made exactly for you a beginner lG.

Tough & Durable: The lathe tools include a rougher, a finisher, a hollower, and a detailer, which make quick work of anything on your lathe. These tools share one handle, which is made of aluminum alloy and has a long service life.

Sharp & Accurate: The wood lathe tools set will provide smooth and neat cuttings together with 4 types of cutters, which are designed for different grinding effects. Importantly, it saves a lot of grinding and honing time, because you can easily replace these blades when they get dull.

(You will get another square tip in the package. ) Ergonomic Design: The wood turning tools are designed with a slender matte black handle for a comfortable grip. Besides, it is a safe choice because it is non-flammable.

Ease Of Use: The wood turning tools set ensures good entry-level setup and use. It is made exactly for you, a beginner lacking confidence or a craft lover in need of an alternative option to supplement your tools.

Wide Application: The delicate wood chisels for lathe can cut V-grooves, make curves and coves, and carve lines.

Wood Turning Tools For Lathe, Carbide Lathe Tools 4 Pcs, Turning Lathe ChiselsnMGCDKHTYGSDYB0001V0 Wood Turning Tools For Lathe Carbide Lathe Tools 4 Pcs Turning Lathe Chisels TOUGH DURABLE The lathe tools include a rougher a finisher a hollower and a detailer which make quick work of anything on your lathe.

These tools share one handle which is made of aluminum alloy and has a long service life. SHARP ACCURATE The wood lathe tools set will provide smooth and neat cuttings together with 4 types of cutters which are designed for different grinding effects.

Importantly it saves a lot of grinding and honing time because you can easily replace these blades when they get dull. You will get another square tip in the package. ERGONOMIC DESIGN The woodturning tools are designed with a slender matte black handle for a comfortable grip.

Besides it is a safe choice because it is non flammable. EASE OF USE The woodturning tools set ensures good entry level setup and use. It is made exactly for G.

CCCDSFZYCFHQJT001V0 Indexable Carbide Tools Industrial Lathe Tools 1/4-inch For Lathe 7pcs In Black, [INDEXABLE SHARP INSERTS]- These carbide lathe inserts with different angles allow this lathe threading tool cutting with more flexibility and utility.

Sharp, straight and even inserts can ensure high precision cutting. [SUPER-HARD 40CR BODY]- 40CR material of these lathe cutting tools has much higher hardness, so stable cutting is achieved due to its superior toughness and crack resistance.

[ADDITIONAL SUBASSEMBLIES ]- This lathe tool set comes with some installation accessories1 wrench (2. 5mm) 2 box spanner (T8), a set of assembly screws and one (95 CCMT060204) blade are to provide much convenience to lengthen the service life of these metal lathe cutting tools.

[COMPACT PORTABLE]- A well-made portable case along with these indexable lathe tools is offered to make these lathe bits easy to organize, store, protect and carry. [EXTENSIVE USE]- These metal lathe tools can be applied to the digital-controlled lathe with various sizes, processing products, heavy rough cutting and other fields of processing.

1/4 Carbide Insert Several angle choices are designed to make it much convenient to adjust the cutting angle as needed. High Accuracy Sharp insert with positive rake cutting angle and the built-in breaker is great for high precision cutting action.

Durable Material Made of cemented carbide and 40cr material, the tool holder is of shock resistance and crack resistance. Convenient Usage Replaceable wrenches, screws set and one universal blade are of cost to offer to make it easy to substitute.

Portable Case The tool kit is made of aluminum, protection polyfoam inside to safeguard tools and easy to carry. Multifunctional Tool Set Perfect for various kinds of processing products, such as digital controlled lathe, CNC lathe, etc.

Indexable Carbide Lathe ToolsThese lathe cabide tools can have excellent performance at meeting your different requirements for various fields of processing products, like metal processing, rough finish etc.

High precision and stable cutting can be achieved through lathe tooling’s sharp, flexible inserts and high toughness body. Indexable Sharp Inserts Super-Hard 40cr Body Additional Subassemblies Compact Portable Package ContentSpecificationMaterialCemented Carbide+40CR Holder Size1/4 inch ColorBlack Package Content 1 x MGEHR 1/4” 1 x SER 1/4”1 x SDNCN 1/4” 1 x SCLCL 1/4” 1 x SCLCR 1/4” 1 x SDJCR 1/4” 1 x SWGCR 1/4” 4 x Wrenches 1 x Assembly Screw Set 1 x Blade.

Includes all three of our carbide turning tools Packaged in an attractive black case Our Mini Carbide Turning Tools feature a replaceable and rotatable cutter that eliminates the hassle and downtime of sharpening.

Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges have grown dull. The solid carbide cutting edges stay sharper, longer when compared to steel. The handles are turned from fine, solid ash, and are ergonomic with molded rubber that enhances your grip and reduces fatigue.

The tools are available in three cutting profiles: round, square and diamond-shaped. Total overall length of Mini Turning Tools is approximately 13-1/2. Ash handles are 9-1/2 long from the butt of the handle to the top of the stainless steel ferrule.

Length of the shaft is approximately 4. Carbide cutters are not interchangeable between the different tools. Diamond Carbide Mini Turning Tool is ideal for use as a parting tool, and for tight profiles.

Overall length of the diamond cutter is 1-1/8. Angle of diamond cutter is approximately 35 degrees. Square Carbide Mini Turning Tool is ideal for flat or convex areas on spindles and pen turnings. Square cutter is 3/8 square.

Round Carbide Mini Turning Tool is ideal for producing a smooth finish on curved, concave surfaces and for general turning applications. Diameter of the circular cutter is just under 1/2.

Wood Turning Tools For Lathe, Carbide Lathe Tools 4 Pcs, Turning Lathe ChiselsnMGCDMBSJT00000001V0 Wood Turning Tools For Lathe Carbide Lathe Tools 4 Pcs Turning Lathe Chisels TOUGH DURABLE The lathe tools include a rougher two finishers and a detailer which make quick work of anything on your lathe.

Each one of them is made up of a quality alloy shaft a beech handle and a sharp carbide tip featuring long service life. SHARP ACCURATE The wood lathe tools set will provide smooth and clean cuts with 4 types of cutters together which are designed for different grinding effects.

Importantly it saves you a bunch of time on grinding and honing because you can easily replace these blades when they get dull. ERGONOMIC DESIGN The wood lathe turning tools are designed with handles of a curved shape that fits your hand well and relieves the fatigue during a long time working.

EASE OF USE The woodturning tools set ensures a good entry level setup and use. It is made exactly for you a beginner lG.

Brand Introduction VEVOR is a leading brand that specializes in equipment and tools. Today, VEVOR has occupied markets of more than 200 countries with 10 million plus global members. Why Choose VEVOR? 1.

Tough Quality Assurance 2. Incredibly Low Prices 3. When any blade gets dull, simply rotate it to reveal a new, sharp edge, or replace it with a new blade. No more sharpening. 4 PCS of Tools The woodworking lathe tools feature 4 types: square cutter, diamond shape cutter, hook style shaft, and round cutter.

They allow you to do cuttings inside and outside a container. High Carbon Steel The woodturning tool set is made of high carbon steel that is strong, hard, and resistant to wear. So, it can withstand long-term use.

Sharp & Accurate The carbide cutters are sharp that you slightly present one to the wood and the tool will do the hard work for you. The tools can be kept sharp by changing them once in a while. Comfortable Grip The grip of the lathe set is made of aluminum alloy that is well protected by the black powder-coated finish.

It is comfortable and looks cool. Easy to Use The woodturning chisel set stands out for its ease of use. Take a key (included in the package) to loosen the nut, and then rotate the blade to a sharper area, or replace the blade.

Wide Application The lathe chisels set can cut v-grooves, make curves and coves, and carve lines according to your needs. Specifications Handle Length: 295 mm (11. 61 in) Shaft Length: 250 mm (9. 84 in) Shaft Diameter: 12 mm (0.

47 in) Handle Material: Aluminum Alloy Cutter Material: Carbide Package.

8 Pcs Style Ar & Al- For General Machining Applications, Turning, Facing, Boring And Chamfering Our Part # All-19892 5/16″ Premium C-6 Carbide Tips Designed For Long Tool Life In Steel, Alloys, Etc. 6 Pcs Style E- 30-degree Lead Angle For Threading, Chamfering, V-grooving, Turning, Facing & Boring.

At only 9-1/2″ long, these tools are the perfect size for turning pens, bottle stoppers and other small items. Carbide cutters can be easily rotated to expose a fresh edge. The set includes one high speed steel 1/8″ parting tool, and two tools with replaceable carbide cutters: a 1/2″ round cutter and a 1/2″ square cutter with a 2″ radius that produces an exceptionally smooth finish cut.

Handles are solid ash encased in thick, molded rubber for excellent ergonomics and a sure grip.

This Round Carbide Mini Turning Tool from Rockler features a replaceable and rotatable cutter that eliminates the hassle and downtime of sharpening. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges have grown dull.

The solid carbide cutter also stays sharp for longer when compared with steel, giving you a much longer useful life. Shaft features a flattened back for stability when using the tool rest. The handles are made of solid ash encased with a thick, molded rubber end for an enhanced grip and reduced fatigue.

Technical Details: Ideal for giving you a smooth finish on curved, concave surfaces and for general turning applications. Total overall length of Mini Turning Tool is approximately 13-1/2″. Diameter of the round cutter is just under 1/2″.

Ash handles are 9-1/2″ long from the butt of the handle to the top of the stainless steel ferrule. Length of the shaft is approximately 4″. Ash handles feature molded rubber for a secure, effortless grip and excellent ergonomics.