20 Best Tips For Driving (2022 Updated)

Purchased this driver and the Stealth Plus as replacements for my SIM and I am an 11 handicap. Both with the Project X Smoke Black 6. 0 70g shafts and 9 degree loft. I play league at 2 different courses and wanted to have the versatility and shot shaping of the Plus at one course and the Stealth for it’s forgiveness on the other course.

From the fitting to the course, these clubs are drastically different in feel. The Plus with the Smoke Black is a very low penetrating flight. This club, the Stealth I found to be very smooth and balanced.

With the Smoke Black however, it didn’t quite add up distance wise to my SIM (8 yard loss). I swapped shafts to my Project X Black 6. 0 75 gram that I had in my SIM and carried the first drive 315. I was consistently averaging 294 over the next two rounds which was 11 yards more than the SIM plus dispersion was tighter.

Very solid club if not one of the best drivers I have gamed!! Bottom Line is that for my game, I need to find a replacement shaft that is close to the Project X Black and not the Smoke Black.

Received it last Friday and yesterday played for the first time. I had a chance to hit two tee shots, one with Stealth (10. 5 adjusted to 9. 75, Ventus Red 5R) and the other – with SIM Max (10. 5 adjusted to 9.

75, Ventus Blue 6R). I did not notice any meaningful difference between the two in terms of distance or dispersion. Both were sending a ball about 230+/-10 yards total on a wet course on a 40F degree day.

I flipped the shafts on the back nine, but did not notice any difference either. I also used Garmin G80 radar launch monitor, which showed a very small increase in Stealth club head speed of 3-4 mph with a stock shaft over SIM.

However, should add that SIM has over 400 rounds under its belt, while Stealth is brand new. Where Stealth really beats SIM Max is in how the shots feel, it’s like a hot knife going through the butter.

Overall, if SIM Max is in a good condition, upgrade probably is not worth the money.

I bought this driver a month ago, I could not be happier except for the distance but in this care it may be the “Indian and not the arrow” as I am 66 years old and don’t have the turn I used to have, still a solid 255 to 265 yd drive.

I have had a handicap as low as 3 and currently at 8. The feel of the ball coming off the club face is incredible, really don’t notice the sound as some reviews have noted. Misses on the toe, no noticeable loss of yardage.

Misses on the heal of course less yardage but still good yardage. Solid center strikes are unbelievable, “one with the universe”. The club sets up perfectly at address and I have the confidence in my set up to make the swing.

I was never a fan of the white club head and really enjoy the look of the matt finish. I gave this review the title of “Robot” because that was labeled by my 20 something players I joined at the local public course.

The driver was very strong and consistent compared to their results. I will check out 3 and 5 woods when the opportunity arises.

This set has everything youll need for an impact driver. Ive had multiple sets before, but now this is the only one I grab out of my bag. Strong metal construction. I did add longer bits to the storage container.

But its perfect to hold whats most commonly used. Id like to give it 10 stars. Anyone complaining hasnt tried other bit sets. Convince of compact size. I couldnt have designed a better driver set. Great job DeWalt.

The DeWALT Flex Torq set I received is different then the one advertised in the Fingerhut catalog and online. On one side of the case that was sent to me, it has the 1/4, 5/16, 3/8, and the 1/4 inch extension- and the Phillips heads on one side of the case lid impact all in their own seperate holder.

On the bottom half of the case it has four torq sockets 1/16,” 3/8″, 1/2″ and 9/16″ and all of the various bits are in a plastic container, instead of their own separate stanchions. As far as the Quality it is naturally DeWALT.

SO it surpasses any other out there.

Bought this kit for the 3/8 drive impact sockets. The small bits and the non magnetic bit holder is just fluff. I plan on buying a few metric impacts to go in this kit along with the standards. The 3 sae nut drivers are useful along with the 1/4 to 3/8 adapter but the rest is just fluff.

If there was a magnetic bit holder for the small bits it would be golden. Another note, I changed the orientation of the bit holder,nut drivers and adapters so that when closed, it keeps the impact sockets in place a little better.

These seem to be as good as a Makita or Dewalt set of the same type. I usually go for quantity over quality with impact bits and just toss them as they wear out, but I’ve put these ones through some abuse and haven’t had to toss any yet.

Since I bought these I’ve built a loft bed and some furniture and random other things and am still using the first bit of each type I’ve needed. The rest are untouched. Normally I’d be on my 2nd or 3rd phillips #2 by now.

I always seem to jack up the square drive bits, but I’m still using the first of the bunch of those as well. Maybe I’ll change my philosophy and keep buying these type quality bits from now on. I’d recommend these to anyone with an impact driver.

Good stuff.

With all the different vehicles, and projects I work on, this is daily used with my cordless driver. Found many different bits useful for the Harley to many covers and appliances on the RV. Comes with 1/4″ driver to 3/8″ and 1/2″ socket which is perfect for all my car/engine repairs.

Over all everything has been durable and surprising how many special bits I’ve found useful. This is a great companion for your cordless Driver.

I am a commercial carpenter for 29 years and installing fasteners is an everyday task. From metal framing to drywall, and plywood to ACM panels the #1 connecting components requires a Philips bit. The SHOCKWAVE is well build for impact driver use with longevity as far a shear goes.

The tip shoulder is taper properly to allow the fasteners to fit tight which reduces wobble and wandering during installation. The slim compact design is great for certain situations when the areas are tight.

All and all a solid bit that can run screws all day if you don’t round it out the bits shoulder. This is its only weakness in my opinion, especially when using an M18 Fuel impact driver at full force on the clutch.

If the bit slips a few time I am changing bits to prevent strip out on the fastener a little more often. As I stated before I run a lot of metal to metal connection, so I always make sure I have an extra pack of 25 on hand.

If you are in the market for a product the professional recommend this is one of them.

Considering the entire reason I ordered this online was for the T30 security bit, and now it is completely useless as a bit is not great. Security bits must have the hole or they don’t work. How could Milwaukee release a product that doesn’t do what it is explicitly intended for? Ends up being a complete waste of money for me.

The kit looks great besides that, but considering that is the only reason I ordered this kit. It is important enough considering now all the security bits you should considered unusable and so it definitely no longer becomes worth the price.

I bought these because I’ve use Dewalt in the past and liked the tools. But these I don’t like. I bought these to use on screws that needed a Phillips #1 head. Unfortunately, these bits were chewing up the screws themselves.

I was have trouble trying to keep the head in the slots of the screw. I had to buy another bit made from someone else and from another store.

This is a very good bit and works great. BUT I always use it with my impact driver and when I put it to the test while doing a wood deck, it didn’t hold up to it. The tip broke off and had to get a replacement.

I’m not sure exactly what happened but my guess is a combination of heating up with the constant use and screwing into pressure treated wood. Maybe Dewalt should make it out of some material that withstands heat a little better.

Can’t beat the price and value, best easy access to your bits. I love this case and bits. Can’t go wrong. Will always recommend and buys these.

I noticed the vane, wanted to curl over not sure why maybe to much primer or the vapor from glue . I have never seen this before!! I like the vane we’ll see how they hold up in cold weather!!!!

I would not recommend these. The base that glues to the arrow is to narrow and these are simply too stiff. Very brittle and break off easily regardless using the recommended adhesive or not.

The vanes are nice with a good stiffness. They do require the prep work for adhesion but not a big deal. I have noticed a little more flight noise than with my heat vanes. I do like their flight control.

Picked up a 2 pack to work on truck. Been loyal to Milwaukee and haven’t had any real issues until today. First bit twisted immediately! Second one got one screw out then snapped. Not too excited in making the drive to get different bits but have to now.

Thanks so much.

Received this item a few weeks ago, and have been happily tackling some home DIY projects using this impact driver set. There are a few torx bits, some phillips and flat head bits, and some magnetic bit holders and nut drivers.

I have successfully used these bits in fasteners inside the home (dry wall) and outside the home (stucco). The bits have all survived with minimal wear compared to some other competing brands. Lastly, the set comes in a nice and portable container which is easy to fit into my toolbag or in my toolchest.

This Milwaukee 36 piece impact driver set was the perfect addition to my tool box! The bits are very well made and sturdy. Since getting them I have used them for various projects around the house and they have held up perfectly, and even exceeded my expectations.

With the durable and handy case they come in makes transportation a breeze, and it also keeps them all in one spot. The variety of sizes in this set makes it versatile for so many jobs. I’m 100% satisfied!.

Used DeWalt bits forever and replaced them way too often. Their Phillips head bits are pure junk. Milwaukee bits are a whole different story. Last what seems like forever…

Great set. Everything I was looking for. Came in very handy for all my projects

The quality of the exhaust tips is very good. Also, I was worried about an odd sound through the baffle. The car sounds great, it has a late ‘60’s/ early ‘70’s sound. That’s exactly what I was was looking for.

Thanks for another good product.

Nice, in Daytona Beach FL, lasted 2 years before showing rust. even though I treated Black Crinkle area with high heat paint. After three years, internal baffles blew out, and I am going to replace them.

There exists better quality tips of various configurations, I do not feel like paying $100 or more per tip. these will do.

They quited down my car enough to get rid of the drone at highway speeds. The chrome looks excellent. But at the end of the black finish it seems like the finished it with electrical tape. I wish the resonating part was perforated rather than louvered.

Overall I am happy with my purchase.

Love the ENTIRE TS product innovations from Titleist. My golf pro recommended I switch to TS series. irons/fairway/hybrid as my Callaway Apex irons were playable for me, Titleist literally took me to another of golf! 15-20+ yard addition with almost Every club, with far fewer off center shots.

Clearly a SUPERIOR product for me. Now a solid 10 handicap after several months of playing Titlelist. Broke 80 on several rounds and likely there more often if I continue with instruction and practice hours weekly.

Truly LOVING golf these days with my more consistent ball striking!.

Bought 2 in March, 2021 – 1 w/ Ladies Flex for my wife, 1 Senior Flex for me. Both 9. 5 Degree, both of us found the Titleist True Fit Hosel Setting Adjustment set at C worked the best for us – controls your trajectory and distance.

Really nice feature. Right out of the box I hit mine 230 yards direct center of fairway the first 2 holes, some other ahh shots, and a great round. We are both extremely pleased. A welcomed club to our bags.

Nice trademark center spot on Titleist Face, great feel @ swing, and @ contact with the ball. We highly recommend this club!.

Have played a few rounds with the TSR2 now, and have been extremely happy after switching from the G425 Max. Dispersion has been fantastic, and it’s definitely longer off the tee. I would recommend going through a fitting to find the right head and shaft for you.

Overall I would definitely recommend this club.