20 Best Usb Tv Tuner (2022 Updated)

There are cases where it is necessary to use a TV tuner on a computer instead of finding a floating TV elsewhere. The small omnidirectional antenna and coaxial connection can be finicky and are not suited for usage with a window with wind.

Having said that, it works perfectly perched on the other side of the window, and the included software and code have DVR-like capabilities. The short USB cable extension is also useful when necessary.

It would be cool if the group could make a Mac-friendly version of the software, but everything is working as advertised.

I wanted to receive off-air TV on my laptop and chose this product because of the reviews and because I like the dual tuner capability, i. e. to receive two channels at once. It is a little disappointing to be a USB 2.

0 connection however in the USA there does not appear to be many alternatives to this product with extensive reviews and it is because of the reviews I made the final decision to purchase this product.

Fortunately, so far it has lived up to its reviews and its advertised tech specs and operational ability. It installed easily enough although the remote control is somewhat flaky with a delay that takes getting used to but seems to work.

The little antenna did as well as the leaf antenna hooked up to a Vizio TV sitting right next to the laptop at the same time. I put ABC on the TV and CBS and NBC on the laptop and watched all three at once and then disconnected this item and packed for travel.

I did not try any recording nor go deeper to check out the software and program guide features. Reception is what I am interested in and so I did attach the leaf antenna from the TV to the unit and saw it made no reception difference better than the included little antenna and that is good enough for me.

I am running this on a Lenovo T460 quad core i7-6600U CPU w 16gb RAM 64-bit win 10 pro OS.

The title of this review is the real bottom line. The HD picture quality is excellent. The dual tuners permit dual viewing, picture in picture, dual recording, or watching one channel while recording a second channel.

Unlike what some earlier reviews noted, the dongle doesn’t get hot; it’s only slightly warm. When connected to a good, outside antenna the tuners are more sensitive than the tuner in my flat screen TV.

The software is easy to use and intuitive to figure out. CPU utilization isn’t as bad as I expected and it even works through a USB hub with no issues. But the software is buggy and crashes often. If it weren’t for the software bugs, I’d give this 5 stars.

FWIW: I’m using Happauge software version 8. 5. CPU is an I7 processor running Win 7. CPU utilization for one tuner varies between 5% and 7% typically and you can double those numbers if both tuners are in use.

EDIT: May 26, 2018 The bugs in the WinTV software continue to be annoying. Without even trying, I can crash the software pretty much at will. However, a new software issue has surfaced and is the subject of this edit: It records the wrong channel at random times! I have several recordings set up to be recurring.

i. e. Every week day at a certain time, record a certain channel for a certain length of time. Every weekend, same thing for certain programs on certain channels. Three times in the almost 4 weeks I’ve had the tuner, the channel which was actually recorded was NOT the channel I specified.

Opening the Scheduler, I find that the specified channel has spontaneously changed from what I entered! I initially rated this product 4 stars. But with the discovery of this newest software issue, I’m lowering my rating to 3 stars.

If the software worked properly, I’d give this 5 stars.

This HDHomeRun Flex 4K is worth the purchase. This is the third SiliconDust device I’ve owned. The others were simple 3rd generation devices. It was easy to setup and configure. And I’m now set for ATSC 3.

0 upgrades that will be coming in the future.

This tuner was exactly what I wanted. It worked immediately after attaching the cables. This was a replacement for my previous HDHR which quit working after 10 years.

Very fast shipping was the only thing I liked. But the units didn’t work for me. They failed to pick up any channels. But it may work for someone else better.

After getting help from Support, I got the Flex Dup working with my external USB drive. I love being able to record all kinds of shows. Works great.

Works surprising well with a Raspberry Pi 4. The only thing that didn’t work was the included IR remote — it requires a Windows 10 USB driver for it to work. But you can easily control the tuner with a wireless mouse instead.

I should note the official Raspberry Pi TV tuner does not do ATSC TV channels which is what TV stations in the USA broadcast. This USB tuner does do ATSC. No special software downloads. All you need is in the Raspberry Pi repositories.

Jump to the command line an execute: sudo apt install kaffeine And that is it for software installation. Then go to the Pi Sound.

This Hauppage tuner is easy to install and set up. Their software provides a simple interface to get started watching or recording television over the airwaves. The dual-tuners work well for recording while watching the same (or another) program.

Some features take trial-and-error; the help documents are brief. The tuner finds channels reasonably well and provides easy-to-use signal monitorinig. It is not as capable as my TV at finding weak channels in bad weather, but this is only an intermittent issue.

If you want your Xbox One to be your main entertainment box this adds an important extra option. Good quality packaging and straight forward to plug in and set up. Freeview HD channels with a good user interface once set up.

I seem to be having issues getting certain SD channels but thats probably my aerial which has been split for 3 devices. All HD channels are there and look great. I would recommend getting a good quality remote controller to use the for media rather than using the game controller.

The connection for the antenna cable into the tuner box is configured to make it impossible to connect a cable! I have tried at least five different connectors with no luck. My only possibility is to take everything apart and solder the connection! I expected at least something I could use!.

It is buld for UK standard and I live in US. It is not working with X Box one X made for US. Antenna connection it is for Europe not US

I’m using the WinTV-dualHD Tuner for my Plex media server on Nvidia Shield TV in Australia. After I plugged it in to the Shield TV and antenna, Plex automatically detected the usb tuner and scanned the available TV stations in the area.

The only issue was on Plex where you have to copy the tv xml guide url (search google), it won’t automatically find it from your location. After that, it’s as simple as binding the correct channels to the guide xml (most are automatic) and you’re good to go.

Now I can watch TV at home or remotely anywhere that I have internet and record up to 2 shows at the same time. This is a must have for anyone with an Nvidia Shield TV. However, I am having some issues with the channels opening slowly, but I’m not sure if it’s an issue with Plex or with the tuner itself.

Overall, it has improved my TV experience and think it is well worth the price! Would recommend.

I purchased this device for my father to replace a Video Recorder which after 20 years wasn’t functioning. As a member of the older Generation he wasn’t Streaming his TV as most nowadays would do. Not to mention the fact, that his wireless didn’t have the capacity to stream much of anything.

The Initial Connection was simple. It works with both Digital and Analoge TVs. The owners Manual was easy to follow. One drawback, the System does not allow for the antenna Signal to pass through if not in use.

Which means whenever my father watches TV the tuner must be on. What I really like about the System is the electronic TV Guide to choose which Shows to record. Unfortunately my father is quite overwelmed by all the “additional” Information.

(Channel number, Name, date, etc. ) All it all, I would recommend it as such. Nowadays one is quite limited to which System can work.

Operation is logical and straightforward, initialization is slick, picture quality substantially improves, record feature (DVR) and playback work fine, high quality. The remote is small, difficult to get around on.

The remote’s signal is weak, often requires repeat entry, has to be held near the receiver. I switched batteries (AAA) so that is not the problem. I bought an external hard drive to store programs, but the unit would of course be more desirable if it had its own storage at presumably a higher price, maybe $20 more.

Have 2 old Magnavox DVD recorders that I use to record Over the air programs. Every now and then there are 3 shows on at the same time that I want to record; so this Terk HD recorder comes in very handy.

For the price I paid I figured it was a disposable device. I have been pleasantly surprised to find that all the recordings have been excellent (better quality than the other recorders}. I currently use a 32 gig 3.

0 thumb drive but I am looking for a 2-4 terabyte hard drive. The included Trinity amplified HDTV antenna was great bonus. Have never been disappointed with any of my purchases from Beach Camera. They are one of the few e-mail adds I look forward to.

#sweepstakes.

I got this for my son, who had an Xbox and does not have cable connected in him room but still wants to watch regular tv. Installation was a breeze, about 5 minutes, and the tuner comes with an antenna.

However, the distance the antenna can reach is only 10 miles which didn’t leave him with a lot of channels. However, I like the fact that the item came with an antenna which gave him an idea of the quality of viewing (High Definition) and the features it comes with such as live tv, pause and rewind or fast forward on paused tv shows.

There’s is also a guide which tell you the shows and the times. The Xbox itself has an app that allows for purchasing favorites channels not reached by any antenna and it’s still cheaper than regular cable.

Overall, very happy and most of all I am saving a lot of money while not complaining compromising quality.

I don’t watch much live TV at all, but every once in a while there’s something I would like to see, like the Olympics, etc. This, combined with a cheap antenna like the Leaf Metro ($12, also on eBay) is a great way to get basic TV channels like ABC, NBC, FOX and CBS in full, uncompressed HD for a single investment.

In my case, less than $50 all-in, and I never have to see a cable or satellite bill again. It works beautifully with native Xbox One functionality like OneGuide, voice control, trending and favorites.

Plus you can pause live TV. TLDR: Inexpensive, high quality option for people who don’t watch much TV to get the basic OTA networks for your Xbox One. Highly recommended.

I bought this for use with an Enigma 2 (Linux) based satellite receiver, not an XBox. This is the same as the Hauppauge 955Q, same drivers, but less expensive because it doesn’t have the video capture cable included.

For my purpose it is plug and play. The easiest ATSC tuner install I ever did. Comes with a 12″ USB extension cable for very flexible installation. Very good quality cable too. Very fast tuner.

I used this with my Linux based MythTV system. I would recommend this product and manufacturer. I am going to purchase the latest version. The final failure, it no longer can change channels without crashing/being lost to the network.

Install somewhere accessible. It will require attention every 2 or 3 years. It does require a DHCP server on the network to provide it an IP address. I suggest setting it’s MAC address to a specific IP.

I bought this item only to install and adjust my TV antenna. I downloaded the Android app and hooked up the Ethernet and rf cables to it. I then went outside with my cellphone to check the signal and quality of the different channels available in my location.

This works great for this purpose. I rotate the antenna until I get the best signals available by watching the displaying on my cellphone. This is a lot easier than adjusting the antenna and then retuning the channels on the TV in the house.

We mostly watch PBS and some local channels. Our OTA signal is poor, so we buy cable service. Did you know your cable company probably offers “Basic Antenna Service”, which gives you ONLY local channels? Comcast charged only $10/mo ($120/yr vs $1700/yr some folks pay!).

Our new Verizon FiOS will provide the same for $12/mo when we are over the promotional deal. Since we almost NEVER use the cable-only channels, it’s a no-brainer to drop them. We love Netflix @ $10/mo, especially with their new streaming service–beats “on Demand” hands down! Think about it.

SiliconDust is planning a new model to include CableCard. This will decrypt, so you should be able to watch ALL the channels you pay for. Verizon wants $3/mo for a CableCard (vs. $10 for an HD tuner), so this ought to pay for itself quickly.

WARNING: My son can’t seem to get a CableCard from Comcast for his set. They seem to be dragging their heels–maybe CableCard can’t get some profitable feature? Check before you commit!.

IšverstiShow in original languageNach über 12 Jahren gute Erfahrung mit DigitalDevices, wollte ich mal Happauge in den Server einsetzen. Leider erwies sich dieser als Fehlkauf. Weder in einer SuperMicro noch IBM Server lässt sich die Karte mit DVB-Streamer abspielen.

Beim SuperMicro ist nach einigen Sekunden schluss mit dem Stream, IBM startet mit NMI immer wieder neu. Tests stehen noch an beim HPE Servern, aber bin jetzt schon bereits start enttäuscht. Im Internet findet man einen Workaround mit “debug=7”, aber dieser füllt die Logs (innert einigen Minuten 500MB an Logs).

Ergo muss man die Logs filtern und artet somit in unnötige Zusatzaufwände. Für diejeingen die mit “Es ist für das Desktop konzipiert. “: Für Desktop braucht man kaum 4x Tuner, oder?.

IšverstiShow in original languageWhen I first set this up it was pixelating all of the time so I contacted Haupage and was given some instructions to follow carefully but first I noticed that my aerial had moved in its bracket so I corrected it and it seemed to ne ok though I didn’t watch it for long.

A few days later I set it to record a movie and when I came to watch it a few days later it was unwatchable with pixelation throughout. This aerial gives 100% perfect picture with no error on my tv’s.

Anyway I started again following haupages instructions to the letter and I jave now tried this at least 4 times with the same result every time. Unwatchable tv from an aerial that delivers perfect picture to my tv’s.

Really, absolute rubbish and I waited 6 months for delivery.

IšverstiShow in original languageThis quad ATSC-QAM tuner card works perfect. I bought it to replace a dual-tuner card in my desktop PC that I use as a media center PC (running Windows Media Center under Win7).

After plugging the card into a free PCI-e slot and powering up the PC, Windows 7 did not recognize the card by itself. But installing the drivers downloaded from the Hauppauge website fixed that problem.

After that, everything installed smoothly; the Hauppauge drivers were accepted by Win7 without protest, and WMC detected and installed the quad-card just fine. (after installing the card and drivers, you just run TV setup again from within WMC; it will find all four tuners) The signal sensitivity of the quad card is very good, even slightly better than my HD Homerun tuners.

I also tested this quad tuner card under windows 10 (I have a dual-boot Win7/Win10 installation on my PC) using Hauppauge’s WinTV 8. 5 application, downloadable from their site (the installation key comes included with the card).

THAT turned out to be a huge disappointment though. WinTV has a terrible user interface, and channel changes move at a snail’s pace (where under WMC it changes really fast so that is not a hardware issue but a WinTV app issue).

But what was worst, the WinTV app crashed on several occasions. It seems Hauppauge is a good hardware design company but software is not their thing. Still I give the card a 5-star review though, because I bought it to work with Windows7 WMC which it does perfect.

I don’t care about Hauppauge’s WinTV ap, so that part is irrelevant to me. So if you buy this card, use it with Windows 7 running Windows Media Center. To my opinion, WMC is still the best OTA TV/DVR app that is out there, even after almost 10 years.

– I have had a TV card before and was disappointed with them. This one is working well. I removed a wireless card form my Dell 7010 system with 16 GB ram and an i-7 running at about 3 GHz. I plugged in the TV Card and rebooted the system.

Windows 10 64 bit crashed upon boot and then recovered automatically and left the card without drivers. I probably should have installed them FIRST. I obtained the software which required a licence key that was, as I found out in the shipping container.

The software installed without issues and the TV functionality was working. – I used it with a $30 HDTV Over The Air (O. T. A) antenna without amplification and it works most of the time. There is a piece of software that came with it that allows you to see the R.

S. S. I of the TV station you are watching and can adjust your antenna for best reception. I use it in my office so antenna options are limited. – The audio comes through the computer as you may have already assumed and use a Logitech H-800 to listen and roam around the office.

If I am alone I use my Bose Solo to my pleasure. – I mostly us a 1/4 on one of my two 27 inch Displays and cam move it anywhere I need to. I have my two emails up, OneNote, and the TV on the second screen and work on the first one.

– I will use it to record local news when I am not available to watch it. The pause button allows you to jump on a call and watch what you otherwise would miss. -.

I was really after another brand, as I’ve had relatively poor longevity from the two previous Haupppauge HVR-22** cards, I found no real viable alternatives, for a PCI-E card, available locally. I decided to purchase.

After some days of usage, I have found the DVB-T2 recording of freeview to be far better than the previous cards: no/very little buffering -even {slightly} better than the USB Solo DualHD dongle. I live under the Waitakere Transmitter; so no line-of-site, with trees somewhat attenuating the signal.

Just am hoping it has a better lifespan than its predecessors. PBtech did an excellent job of supply & delivery, in these difficult times. Thanks to all involved, it is greatly appreciated.

The initial cablecard I obtained from Charter was defective. If the second indicator light from the left does not come on when you plug the cablecard into the HDHRP you need to take the card back to your cable provider and get a replacement.

If you plan on retaining one of your cable boxes and want to access on demand services with those boxes, make sure they don’t change your account to “cablecard only. ” Have had to reboot the boxes and the tuning adapters a couple of times to correct cable provider issues.

This is actually an improvement over the Charter DVR which required frequent reboots. WMC will not be available with Windows 10. Windows 7 extended support continues until Jan 14, 2020. Windows 8 extended support continues until Jan 10, 2023.

If your current operating system is Windows 7 or Windows 8 Pro (WMC only available with Windows 8 Pro) your best bet is to utilize WMC until you need a new computer that comes with Windows 10. Silicon Dust is working on DVR software that will replace WMC and be the only option if you want to view and record DRM protected content on a Windows 10 computer.

The DVR software is currently being Beta tested and is not quite ready for prime time. Your best bet right now is to stick with Windows 7 or 8 utilizing WMC until the bugs have been worked out of the Silicon Dust DVR software.

With WMC recorded DRM protected content can only be played back on the computer on which it was recorded. Content that is not DRM protected can be streamed to and viewed on any Windows device that is connected to your network.

The new Silicon Dust DVR software is supposed to fix this and allow the steaming of protected content to other Windows devices on your network. The HDHRP is also capable of streaming content to non Windows devices on your network.

I am not familiar with this aspect of the product but a little research will get you up to speed on the topic.

Hopefully this info is helpful: In your diagnostic front page, make sure that it shows. Card Authentication success Card OOB Lock success Card Validation success The info the cable company will need, is the CableCARD ID, Host ID, & Data #’s.

Take note, AFTER the card gets validated, your data number will probably change, stay on the line with the tech till the new data number matches on their end as well. Once you get the go ahead, then scan for channels and they should all be there.

I have this setup for 5 computers and 1 android. I had DRM issues on one PC, On the other I had to reinstall the HDHomerun software to get it working in WMC. The DRM issue PC was my HTPC/Gaming computer that’s connected to the big screen.

Got that issue resolved and dang, it sure is nice getting rid of the cable box. I have a Logitech wireless keyboard/touchpad and a WMC remote connected to that setup. Android SD channels all tune just fine, HD channels stutter every once in a while (Galaxy S5).

Also, for those having the dreaded DIGITAL CABLE ADVISOR failure, try this. Check your MONITOR driver. On 2 of the PC’s I configured, the DCA failed on the video card, after updating drivers and what have you, I still had the issue, so I’m flipping though driver info for the displays, and I notice that TEAM VIEWER was set as the driver provider.

All I did was ROLL BACK the driver, this allowed me to keep using Team Viewer and pass DCA using a Microsoft provided driver till I downloaded updated ones from the manufacturer. It does take some skill to configure this unit and I wanna say each of the individual problems I encountered were solved with just a bit of research.

I would hope that others who purchase this unit and have problems with it, don’t hate it right off the bat. research the problem, get it setup right, it works fantastic!!.

Being a computer nerd since age 9, I’ve always had a few extra computers lying around. I took three of those computers (w/ Windows 7 and Windows Media Center) and this unit and ditched the HD DVR and 2 HD set top boxes I was renting from Comcast.

My bill went from $110/mo to $65/mo enabling me to save enough money to pay for this unit very quickly. Long story short, I have a fully functional DVR and two “set top” machines that I can use to watch live TV and watch the recorded TV stored on the DVR.

I highly recommend having a gigabit network if you try something similar to me as this unit can throw around enough data to max out out a 100mbps network easily. If you have Comcast or another CableCard television service and a little tech knowledge, I highly recommend purchasing this unit.

It will pay for itself and save you money in the long run. I personally have loved having complete control over my television equipment. I no longer need to have a Comcast van visit me or run to a Comcast service center to swap out equipment.

If there’s a problem, I get to fix it and it almost always takes less time to fix than it would if I had Comcast do it. Owning your own television equipment and modem/eMTA and receiving Comcast service through them is a great, and somewhat comforting feeling.

Plus it saves lots of $$ over the years–what’s better than having a lean monthly bill without sacrificing service? If Silicon Dust products aren’t your cup of tea, I would imagine you could achieve this same result with the Hauppage or Ceton network connected tuner counterparts.

Best of luck, everyone!.

I am pleased that I received, receiver earlier than expected. It was delivered the correct way. By sliding gate open, and placing package at front door. Then upon departure, closing my gate. Reason for that, I have had HORRIBLE deliveries.

Packages thrown over the gate. Merchandise damaged, etc. Anyhoo the reason for the 4 star. Wayyyy too much instructions. I’m a straight to the point kinda gal. I was so happy it came. But then when I opened the box.

Saw all these instructions 🙁 REALLY!!! I was so burnt out. Couldn’t do it, didn’t do it for three days. I tried watching TV with Locast. What a scam! It’s free, OH! But we need your help, by donating $5.

Anyhoo! After the the three days, I hooked up my device. I did not bother to read instructions. And I hooked it up with no problem. So in all I am satisfied with my purchase.

If you are looking for a simple tuner to watch over the air programming this is an inexpensive option. But if you are looking for a DVR you should look elsewhere. This STB is very glitchy and at times does not respond to the remote and sometimes reboots itself.

I would not trust this DVR to record anything of importance. The user manual is incomplete and inaccurate in many regards.

Hubby got everything set up so it was super easy for me (haha). We suspect the tuner is going out on our TV, but didn’t want to spend that much money right now to replace it. It works beautifully! The channels we were having so much trouble seeing are crystal clear now! Not thrilled with having yet ANOTHER remote to use, but it sure beats spending $$$$$$$$ on a whole new TV!.

I bought this due to the fact it received good reviews from other purchasers. But I can only conclude that the 5 star reviews must have been written by employees of the company. I bought this antenna to use in a porta cabin, (not a metal shipping container) I tried it in various positions, both indoor and outdoor, vertically, and horizontally, attached to the outer metal chassis of the cabin with the magnetic base.

I was expecting it to receive at least a few channels, then having to re adjust to receive more channels. But this was total folly. I could not receive 1 single digital tv channel. I wouldn’t care, but this antenna is advertised as “high gain” when in fact, it only has a gain of 3db, but this is not stated in the listing.

Most other loop antenna have a built in booster, and even with a gain of 40+ db, you will struggle to get a stable, smooth, quality picture reception. My advice, don’t be taken for a ride by the false inaccurate reviews.

This antenna cannot provide a decent picture, unless you live within 1 mile of a transmitter. Don’t waste your time, or money on this piece of utter crap. It may work with a signal booster quite well.

But the listing leads you to believe a booster is not required. But with a gain of just 3db, you aint gonna be able to sit down with acuppa, and watch your favourite show without getting totally pissed off with this rubbish antenna.

It WILL NOT deliver what it is meant to deliver, in most cases. Spend an extra tenner, and buy a loop antenna with a built in booster with at least a 45db gain. At least you will have some channels to watch.

I live in a difficult area for TV signals and was surprised and delighted at how such a small item can pull in the channels that others can’t. I no longer need to get a new roof aerial and I have recommended this device to others.

I have ‘hidden’ it behind the lounge curtains and that has no negative effect. Truly superb.

I bought this little aerial after reading the reviews (good and bad) and for a tenner, I thought that it was worth a chance. Now I bought this primarily for a new DAB radio setup that was supplied with the usual wire dipole.

The wire aerial was ok, but unsightly. I must add that I am only about a mile away from the transmitter. This August DTA240 performs superbly, giving more DAB stations at a higher strength. I then tried it on my Freeview TV that is in a bedroom running on an indoor aerial.

The reception was magnificent, it picks up more channels and even on HD there is no pixelation. I must stress that I am lucky to be close to a transmitter, I havn’t tried the aerial further afield. In my situation, this aerial is fantastic both on DAB and Freeview.

I will also add that I was impressed by the build quality,.

Ordered last week and received in 4 days from UPS. I have purchased several items in the past from Channelmaster and all have been excellent products. I have two DVR+ units that except for the channel schedule issue, still operate like they were new.

My original PAL took 10 years to start showing it’s age but finally gave way to the current DVR+, both of which are still going strong. (I had to get creative with the program guide and put it in manually) This new TiVo Edge seems to be well thought out and well made.

I’m picking up the usage slowly but making progress. My only complaint would be short and sweet. The TiVo Edge should have a complete Owners Manual with it, in the box, not just a setup guide. Granted, there is an owner’s manual on the support site.

72 pages, which I had to Download PDF and print out, punch holes in the pages and place in a binder. The manual is detailed and great, but should have come with the unit. With all this being said, The TiVo Edge appears to be a nice unit with load of great features that work properly with a little study on my part.

I believe we will be best buddies. The all in service made it a great deal at a good price. MBrock.

I only bought this because I still have my Channel Master DVR+ but it only gets 12 hours worth of guide. Very aggravating! So, the Edge programming is a little complicated at first due to no manual or guide to help you along, just a start-up guide.

The previous CM DVR+ was a lot easier to program than the Edge. I took some time tinkering with multiple options to finally get what I wanted. I hate that you can’t adjust recording quality so HD eats up the 500gb quickly! I love the fact that when you turn on the unit, as long as you’ve programmed the TV code, it cuts everything on, changes the input and voila! I do love the commercial skip feature although it does NOT work on EVERY recording.

I do wish it was like the DVR+ in that you could change how long your advance feature works. I like mine at a minute skip and 30 sec. rewind. I just hope Edge guide doesn’t end up like the DVR+ programming guide later down the road even though I bought the All-in service.

It seems ALL the DVRs are going the way of VCRs! Bye-Bye due to cable companies buying them out then shuttering production!.

Happy with Tivo Edge. I like getting the 72 internet channels on Tivo +. Taking time to get use to using the features and remote. Upgraded from Channel Master dvr+ that is six years old with 1 GB HD and records 600 hours.

Edge has 500 MB HD and stores 75 hours. I thought it would store 300 hours but the Edge HD is used for many of it’s features so only enough space for 75 hours. It automatically overwrites the oldest stored shows.

Do not plan on saving movies long term. No functionality to store movies. For me if I want to save shows long term I still have my Channel Master dvr+ that I can record with. I wish Tivo would have provided a user manual even inline.

Alot of functionality. I have to keep Googling how to. After two days I believe I understand and can use most of the features. I don’t think we should have to search the internet on how to use a dvr.

TranslateShow in original languageLo uso para una segunda TV en el dormitorio. Es muy pequeño y discreto y funciona perfectamente. Ahora puedo hasta leer un disco duro. No he probado a grabar ya que no es una función que use habitualmente.

TranslateShow in original languageLo que más me sorprendió es su tamaño (muy pequeño) y su calidad. La imagen de los canales HD es muy buena y se configura rápidamente. En el apartado multimedia reproduce mkv,avi,mp4,.

una pasada. Lo recomiendo , ya que además fue muy barato.

TranslateShow in original languageEl aparato es pequeño pero muy bueno coge muy bien la señal y la imagen es de calidad, una pena que este modelo tenga un defecto de fabricación , el canal a3 series los anuncios salen en español todas las pelis en ingles tienes que pulsar el boton audio y cambiarlo a modo español cada vez que pinchas en ese canal si quieres verle.

I received the device today without the hard drive

Bester 4K linux sat receiver