20 Best Utv For Hunting (2022 Updated)

First and foremost it is made in China. The only reason it got 4 stars, its not heavy duty but the design is good. Better then your standard craftsman dump cart. The wheels and tires are beefy and look like they will take the abuse.

It has good ground clearance. The dump latch seems ok. Time will tell.

Great quality trailer. Went right together and had all the necessary hardware. All holes lined up and bolted right together. The trick is not to tighten the bolts firmly until all the bolts are in. Highly recommended.

Nice product. Instructions state will not work with Can Am X3’s, which I purchased for. Simply use drivers on passenger side, they will be upside down which turns out to be a PLUS, because the small mirror shows the rear tires perfectly.

Plus being upside down, they follow the X3 body really well. Being a proud American, the only thing with having them upside down makes the American flag upside down. working on a fix for that. Very nice mirror, way cheaper and better than the Amazon or eBay stuff.

I recently bought the Kolpin 3 mirror set. The center mirror is clear and works exactly like it should. The side mirrors are another story, though. The roll cage clamps don’t seem to fit my Mule Pro FXT, very well.

The clamp keeps slipping on the tubing, even with the supplied inserts. I’m scared of tightening them any further, for fear of breaking them. The mirrors keep folding in, while driving. I tried tightening them, and ended up pulling one of the studs out of the plastic piece that it was in.

The other side still wants to fold in, going 35mph, going down a smooth country road. I would NOT recommend these mirrors.

Bought for my husband for Christmas. Literally broke 4 months later. No rough use, just lose and then eventually broke. Do not recommend, wish I could return.

The winch is great and reliable so far. I did have a small issue on install due to some confusion over the models throughout the years. I have read that XP and SP are essentially the same thing and Polaris just changed the name over time.

Turns out that isn’t the case. Instrcutions say if you have an SP that you would need to relocate the solenoid. Since I have a 2018 570XP, I did such and installed per instructions. It was tight fitting between the radiator and solenoid contacts.

Tried to test the winch out and had already worn through the contact boot, causing a immediate battery short. Luckily it wasn’t enough to fry anything but it could have potentially been real bad. I put the solenoid back where it was when the winch came out of the box and has been working great since.

Recently purchased the quad and immediately went to the woods to get ready for deer season. This job consisted of dragging a 2 person box blind on 4×4 skids through the woods on soft dirt. Blind was chained to the quad and id use the winch to pull against trees in front of me.

The final maneuver was to position it to its final resting position where the quad was anchored against a tree and used the winch and a shackel to pull it the last few feet. Worked great and did not disappoint.

The weak point in my set up was the non welded eye bolts tha bent and gave loose when I met an unmoveable stump.

Fortunately, I’m not an ***. the instructions are very poorly written. Not only are they vague and contain spelling and grammar errors, they also show a list of tools required which did not correspond to the sizes I actually needed.

Shows as a 20 minute install – yeah, no. Maybe now that I did one, I could come close, but it took a solid hour and a half – again, as I was trying to follow the instructions rather than common sense it.

Works great, good winch. Instructions stink. Come on Polaris.

Simple installation. The unit arrive pre-assembled with locktite on the fasteners making it harder than necessary to adjust the position front to rear adjustment of the the gun rack. The only real negative comment is that I hit my head on the rack as I enter the driver’s seat.

That may be remedied by better placement or more adjustment. The AR or M4 platform does not fit well in the rack with the straps provided. Modifications will be necessary to hold that type of weapon.

Over all the rack is well built and I would purchase this item again.

Initially bought for 2020 Polaris Ranger XP 1000 Premium, though couldn’t fit at best mount location. bars are either too close together or too far apart for snug fit on stock forend. Rack is built very heavy duty with lots of adjustment options.

Have since gone with floor mount gun rack so I’ll keep this & modify it for hauling shovels, axe or garden tools in the bed.

Works great. Fits tight and quality made. Very happy with the rack. Adjusts easy. Fit perfect

I installed the rack in a 2020 Ranger 1000 and even though it has a hump in the middle it works just fine. I was able to drop it low enough for the guns to clear the mirror. I also added a support from the rack to the cup holders.

Pleased with the purchase. Got my deer on opening day.

Terrible assembly instructions, what should have been a 15 minutes process took 4 times that, using only the photo on the box as a guideline. Tried mounting it in a Polaris 570 crew 4 seater. No way you can have an adult male in the passenger seat and 2 guns in the rack and it won’t mount in the back seat area because of the grab bar.

If you mount it in the center you can’t use the gear shift with a rifle in the rack, mount it to the side and the passenger has to sit side saddle.

Very good product. Easy to assemble and install. Very well constructed. Holds rifle securely. Can be installed in multiple positions. Definitely recommend this product. Thanks

Installed on a Grizzly 700. I used the 12” and 3” heavy mounting brackets which only caught the tubing of the existing rack. I added a 36” piece of 3/4” square tubing to the front of rack and that worked out great for getting the existing rack frame.

Finish and packaging was great, received within 3 business days. The hardware included was substantial for any configuration but I just wanted a little more strength so I added the extra tubing. The existing rack was hollow channel and I was afraid of flattening when drop basket was loaded.

The basket did cover tail/stop light so I’ve added reflective tape for now and working on a mount to move or add a lamp to basket. Only reason for 4 stars was I would have liked a heavier gauge of expanded metal.

Fast shipping and good quality. I used it in a different application. Instead of putting it on a atv/utv, I installed it on the back of my compact tractor. Worked out perfectly. Now I can haul all of my chainsaw equipment with me into the woods.

The flat part attached to the basket is perfect for sharpening or changing chains in the woods.

I was looking for a basket to carry tools and gear and this item is a perfect size and design. It sits far enough back that you don’t have a basket hitting your backside. It was easy to install and looks really good.

The manufacturing of the unit with clean welds and no sharp edges demonstrates quality and the price was outstanding when compared to comparable units. Great product Titan.

The rack works great on our Polaris 700. We had to shorten the middle brace so the guns would sit lower and added pool noodles for protection of the guns. We also purchased the tie down inserts for installation.

All in all the rack is very sturdy and we are happy with it.

East to install, works great to hold your guns in place.

EZ installation, pretty tough construction. I put it on a Kubota RTV 900. Had a hand using it on the farm weed eating and mowing. I saw his son use my new gun rack for a ladder to climb on top of the UTV.

No damage.

Easy to assemble, sturdy design, grips my roll cage perfectly. I have it mounted on a UTV and ride very rough roads. It has not budged , moved, or needed re tightening in any way. Good options available for rifles & shotguns.

Also offers an option to mount your long gun inside a soft case.

Well made. Works as expected. Fit my Yamaha Wolverine X4. Length in description is incorrect. Fits between center and rear roll bars. Have to flatten end tab to fit with roof on

This rack is awesome. Works great as advertised. A pleasure shopping from side by side stuff and Fast Shipping.

Received this Bow carrier the next day. It is well made and the padding that is in the carrier is great about 2 inches thick so that the bows will not rub on each other. We can leave our stabilizer on out bows, They do stick up out of the carrier but you can zip the zipper up on each side so that is great.

the quivers will not fit in the bag but that is fine. We are really very happy with this bow carrier.

Really easy to install and it will keep my bow and my wife’s bow safe when we are riding on rough ground. Plus on cold mornings it keeps the wind off the back of your neck.

This bag is awesome! It kept both my sons and my bow clean and handy on our bow hunt. It sure beats having to hold your bow or have them bounce around in the backseat of the RZR on those long trips to the hunting area.

It stayed really secure the entire trip and performed flawlessly.

It arrive on Wednesday and we used it that Friday and Saturday at our hunting club and it was “AWESOME” were the words of everyone that saw it at work. Everything was as I expected it being from Moultrie, the only thing that was not a 5 star as far as I was concerned was the “cheap plastic” plug that you plug in the power.

It kept vibrating out and every time that it does you have to re-calibrate it each time. I think that I might clip that plug off and add a set of clamps like jumper cables and hook it to the battery under the seat.

But other than that it worked exactly as it should. OH, I WILL NOT put fertilizer in it at ALL. I DO NOT RECOMMEND THAT, AND IT STATES THAT IN THE INSTRUCTIONS. Thanks, D.

While the bracket worked perfect once I began to spread seed the spreader continuously stopped up and took me hours to spread just a few loads of seed. The felt that is supposed to let the motor open and close the sliding discharge plate kept hanging up the plate.

I tried 2 types of seed and had to stop over 30 times to unclogged the spreader. I will not be using this spreader again and that means the purchase of the ATV bracket was a waste.

The assembly instructions are challenging, and even for a very handy person it wasn’t as clear as it could be. With my particular unit the spreader door jammed when I tried to open it, causing me to have to in-build it a bit to find a solution.

All in all a good unit but a few refinements would make it better.

While I haven’t owned my Stallion very long I have owned plenty of other ATV’s & I have always done my homework. I read all the reviews & comments before my purchase. My local store did not have one in stock so I ordered one based on the features, price & the reviews.

I’m very pleased with what I’ve seen so far. The has a nice strong frame & many things standard that are options on other brands. Some of the negative comments by others, such as difficulty with the doors or the steering wheel not being oriented straight I have had none of.

The steering wheel is a very easy fix. I opted to finish the assembly of mine myself. Absolutely no difficulties or issues. There were a couple of scratches & a small dent in one of the speaker housings but by & large it’s easy to over look things like that when you buy it to put to work.

It’s not going to stay blemish-less. Also when you are getting a 4 speaker stereo, front & rear winches, excellent tires & wheels and all the other goodies I can live with a scratch or two. There were other reviews that said it seemed loud.

My 4-Wheeler is much louder, so I’d my Zero turn mower. Lastly the comments about the dual winches not having individual switches may have been corrected. My plugins are on the front dash, both are clearly indicated & it’s quite simple to move the switch from one plug to the other.

To summarize I think this is an excellent buy for your money & I have no hesitation recommending this to others.

Delivery was quick and as promised, just in time for me to cover my side by side before snowfall. It is definitely heavy duty, well constructed, and withstood some very high winds that have come through here in Ontario.

I did throw another set of straps around it to just take up some slack above the side by side bed, just to prevent any flapping in the high winds, and avoid any pooling, but it may have not been necessary, just some extra piece of mind.

My suggestion is to start at the front of your machine, the ‘Cabellas’ logo goes over your front windshield, and it is large, bulky and has some weight – but once you have the hang of it, you will be able to slip it on and off with ease.

Because it is so big and heavy, it is likely to hit the ground sometime during installation, so it will get muddy (if that’s your ground condition). it’s not a cheap tarp at all – it’s great, and will do a great job under any conditions.

I would definitely say it 5 stars and very worth the price.

I’ve purchased a number of the lighter weight covers for our Polaris RZR and they are fine for a short time, but the sun inevitably destroys them. This cover (purchased the gray one) has lasted through an entire summer of the harsh pounding sun, a few torrential downpours and some windy conditions that would have destroyed lesser products.

The only downside is that it is a bit heavy and cumbersome to put on without help. It is also bulky and not as easy to store as the light weight version. But the lasting ability of this cover makes it a must have if you have to store your machines outdoors like we do.

I highly recommend this product!.

I just purchased this for my Tracker 500s. It is worth more than 5 stars. The material is bomb proof. The construction is perfect. The fit was was perfect. This is a heavy duty cover, not simply a bug or dust shield.

It has strongly sewn straps attached from and rear and both sides for the included straps that go lengthwise and across the undersides, making this very much usable for trailering. Superb purchase.