18 Best Utv For Work (2022 Updated)

I read that the instructions left a little to be desired but I put it together with my 7 year old so they were just fine! This seat went together quickly, attached perfectly in my UTV and the kids are so happy to be able to ride in the back again! I’m not sure how comfortable adults would be but only my kids will be the ones using mine.

While the instructions could use a little better detail ie larger print and larger diagrams everything went together after one or two tries. It is easy to put in and take out of the bed. Very sturdy for such a light weight seat.

Good seat but I will lose the cotter pins moving the seat up and down and the seat belt is kind of a hokey set up. It would be nice if it was 2 separate seat belts that bolted on instead of the knot in the middle.

Material quality is good and it functions as a seat.

Easy to assemble. Easy to hook up to UTV hitch. I had four solid concrete blocks on the back and it drug behind really nice. Did and awesome job on the driveway. Had a little trouble securing the blocks.

Overall I loved the drag and would definitely recommend for driveways (we have about a 1/4 mile of dirt). I am planning to try this out on my hunting trails next.

The plow is garbage. Do yourself a favor and don’t buy it. The white metal that holds the adjusting area breaks constantly. Can’t even trim a snow bank with out it breaking. Kimpex does nothing for you as well.

Research another brand, please!!!!.

First time plow owner and have only used the plow twice & works great. Seems to be a very well made plow. Components all seem well made, system is easy to use and durable. Very nice system.

Built sturdy. But like there video on YouTube stats that it goes up 16 inches high is wrong. On my 05 Polaris ranger I can only get 10 inches of clearance when up the whole way.

I like the mossy oak wrap. Once I experimented with how the wrap works with stretch and shrinkage it got easier to work with. However I did mess up the first panel I will probably have to purchase another small piece 18inches ×4ft.

It was difficult to stretch down in the door handle recess area witch was 1 1/2 inches deep. I could not find any instructions on how to apply to an area like this.

Awesome material! The look and fit, find it very difficult, to differentiate between a printed plastic and the actual 3M wrap. The only gripe I have is; a professional did my application. A perfect application takes practice-a note about important tidbit, might be helpful.

Overall, a great product!.

The camo wrap really worked good. Just kept pulling it off and redoing till I got it right. Even where I made a mistake ,all I had to do was put a patch over it and you couldn’t even see it. Great material.

This camo utv ride on toy has brought so much excitement to the farm. It runs on real tires and has real working headlights. Also comes with FM radio and bluetooth. Has sound effects and you can push the pedal just like on a real atv.

It has power strip rubber tires and can go almost three miles an hour. It comes with a complete charging system and a volt rechargable battery. Maximum weight of lbs and my babies are gonna love riding this over the summer.

Every kid needs a new riding toy when they are small.

Its heavy and big. Loading onto a trailer is a two man job. I bought mine to mow trails through grass and food plots. Instructions for the tow bar installation from Swisher were not the easiest to follow so I went online to find help there.

Prior to buying, I didnt think I would like the remote start/blade control box mounted to the ATV. I actually loved it. Finding a battery wasnt the easiest at my normal stores but eventually tracked one down.

The only knockI got a flat tire during my first use. I would prefer solid tires and will be checking into that aftermarket.

I recently purchased a new Swisher 44″ Rough Cut Mower with the 14. 5 Kawasaki motor (that starts & runs great). Be sure to pay the extra money for the electric start Kawasaki!!) Last week using my Honda Foreman 450 ES ATV I cut all of my land and trails on and around my hunting land (several hours, 4 tanks of fuel in the Swisher).

Tall grass, weeds, rocks, small trees, etc are no problem for the Swisher, it cuts and goes through these areas with ease. The only thing I would recommend is that Swisher add (4) wheels, (2) on the front & (2) on the back of the deck for easier trailer loading & unloading and whenever you have to back up if you hit a stump or get pinched in a turn or a steeper uneven ditch.

Several times when I wanted to back up or even go forward on a tighter angle or ditch the deck would hang up and dig into the ground. A few times I had to unhook the unit from my ATV, muscle the mower sideways by hand and re-attach it to my ATV (kind of a pain).

I also had to use my ATV winch one time to pull myself and the deck forward out of an uneven area where the deck dug in bad. So I’m going to drill four holes in the corners of my mower deck and bolt on (4) 4″ or 6″ diameter wheels that I think will really help me maneuver better over my land.

Over all I am very happy with the Swisher and rate it 4 1/2 STARS, you wont be disappointed on how well it cuts and goes through tall grass and saplings.

Used the mower for a day. Both tires ended up flat. The only thing I can figure is that when they built the crate for it they shot staples into the tires or as I pulled the crate apart it punctured them with slow leaks.

The crate is crazy. Need a sawsall and four people to get it apart. Really could have been done better. Other than that, the shipping company is a pain to get a hold of and schedule. Everyone is short-handed, so I get it, but let me schedule through email or an app or something then!.

Looks great. Went together easily. The only thing that I could see a problem with is the Three small washers that the kit comes with. I went out and bought three fender washers and three rubber washers the same size to keep out the water.

I was worried about the small washers that they give you with the kit pulling through the roof when the Utv is being towed from the wind. Other than that it fits great and looks great.

Installation of this roof is a lot easier with 2 people, but I did it alone. The design is great and solid. Install took a while for a couple of reasons. While most of the hardware is great, the M5 hardware (on the cover bracket) is really cheap and strips out long before you can ever get it tight.

You might want to have some extra on hand before the build. Unlike the previous reviewer, I found that one of the holes just refused to line up no matter what, so I had to drill another hole and seal the old one.

No biggie, just filed the other one with Permatex. But I wasted a lot of time trying to make it fit. Now that it is on I love the roof!.

Install was a breeze. Instruction was easy to follow. Doesn’t quite fit to good in the front with the super atv windshield. Have a 2 inch gap in the middle between the windshield and roof and on the edges, they are touching.

Idk if it disign that way or if it got bent in the process.

I have owned going 2 or 3 years now. I spent hours of research on brands and features of each lift out there. Everything is a comprise of features. Do not buy on cost. 60 in size. The main reason I bought was for the 48 in height.

No problems at all. Serious home use (riding lawn mowers and lawn tractors). I’m impressed with welds and workmanship. Paint/coating has held up well. Your not going to move this around the shop, it is heavy.

Love the width to drop deck and slide out of way to work under. Don’t regret buying one second. Cons is having to reach under side extension to moved the lock. Especially if table is on the lower 2 or 3 lock positions.

But could be modified with welding a longer rod on if it bothers you. Keep the ramp clean (it can get slick) or put anti-slip strips on.

The table is awesome. The quality is there along with the stability. I work on lawn equipment that can get pretty heavy not to mention the extra wide table can accommodate all kinds of units. I mounted the pump between the side panels just below the font tire clamp.

Works well. All in all it’s like winning the sweepstakes! Very satisfied. The only thing I would change is the drop out. If you forget to put it back up and lower the table. It gets caught behind the legs and bends the drop out then it doesn’t fit so well.

I’ve straightened it out twice now.

Received the winch a couple of days ago. Prompt, but the bracket is not included. No reference to a bracket being ordered separate. Luckily I had a bracket that I was able to modify. Bolts didn’t fit, used old bolts from the other winch.

I’ll finish wiring tomorrow. Might be a good idea to call for the bracket, if you don’t have an old winch lying around.

I purchased the Warn VRX25 for my Honda Rancher 420-ES from Bass Pro. I previously purchased the winch mounting bracket and accessory wiring harness from other vendors. Install took longer than expected.

Super happy with the finished product. Now not worried about getting stuck when alone on the hunting lease.

My dad and I bought one over 10 years ago! We have done so many food plots in the GA clay and some food plots in FL. We have been using two concrete double blocks for extra weight. Only down side to the product is needing the added weight.

I would have thought by now weight plates to set on the square tubing would be available to purchase. If so how can I purchase them.

I bought the 33′ one last summer for about 2 acres of food plots. Largest field is 1. 5 acres, other 2 are. 25 acre each. PROS: The construction of the disc is very high quality. Solid welds, high quality metal, discs and tires.

Easy to adjust and gets down about 5-6 inches easy with a little weight added. It is perfect for those hard to reach spots or/if you cannot afford or do not want to invest in a tractor with disc or tiller.

CONS: The finish work, ie paint, is poor quality. It appears as if it was sprayed on as they were rolling it out the door. It came new in the box with the paint chipped. Not a huge deal as you are using it in dirt but with the lime hitting the bare metal spots, I just make sure its rinsed off when done.

It will rust but I not terribly concerned as it is farm equipment. SUGGESTIONS: The unit itself is heavy enough but bounces a little if you go too fast. As seen by the pictures, I welded a few anchor bolts to each corner to add a 50lb weight to each corner.

It worked well but was kind of loud with the weights slapping against metal so I sectioned a blow down tree and strapped that to the unit for weight. I think the extra weight is necessary especially if like me, you were incorporating lime into the soil.

For some reason this works MUCH better while making right hand turns. I’m guessing it has to do with the angle of the discs. I had to go over my fields 2-3 times to really get the dirt turned up but again I’m nitpicking.

Overall I would highly recommend and would buy again without hesitation.

The unit is a workhorse. I have two food plots, each consisting of a a little more than 1/2 acre. I am pulling it behind my Polaris 570 Sportsman and have not had any issues. I added steel weights to the top of the unit to give me extra depth and it has held up really well.

It cuts making right and left turns but I will tell you that the unit will make a deeper cut making right turns. This is because the way the front discs are facing. Overall I am very happy with the disc and cannot say enough good things about it.

Adjustment is easy and the wheels makes pulling the unit from one food plot to the next a breeze.

The good first. Shipping fast. Has everything you need in a very organized box with plenty of hardware, wire and winch. Now on to the installation. If it mounts with the hardware supplied, you can have it in, wired and working in 2 hours.

Now the bad. This will not fit a 2018 Yamaha Kodiak 450. The bottom plate sitting on exactly where you need the bolts to line up causes the bottom part of the gear housing to be sitting on the ATV frame.

Won’t work! So being that I can make most things from nothing I figured that if you slide the winch all the way to the right side of the ATV it will come off the frame and sits perfectly. However, now only one hole lines up.

You will also need bigger washers then what they give you, this of course is after you pull the front bumper and drill 3 new holes in your front bumper assembly. I suppose if you could weld that would have been an option as well.

That problem doubled the install time to 4 hours but I did get it in. It’s not centered, but functional. Do better knowing about figment especially when you shop by the model you have. I am sure I am not the first person to discover this! It said it would fit my machine.

I should’ve had to drill new holes!.

Installed on a 22 Pro XP. The instructions included in the kit did not advise that the winch would have to be un-spooled and reversed, and that the wires would have to be reversed from blue to yellow and yellow to blue where they connect to the winch.

I used the Super ATV You tube video for installation which I thought was great, but still made no mention of having to do that. After installation was complete and cable was incorrect, I found a thread on social media advising that there was an online set of instructions which advised the wiring and spool had to be reversed.

After discovering this fix, I had to disassemble and reassemble to correct the issue. After corrections were made the winch seems to work fine and I am happy with it. The winch seems solid and of quality.

Time will tell. Please add a note to the instructions that the above items may have to be reversed for certain models. Thanks!.

The bracket that they supply with the Honda Pioneer winch is a universal bracket which doesn’t line up or work on a Pioneer. I expected that purchasing a winch from Honda offroad designated for a Pioneer would come with the correct bracket for the install.

They also offer a military discount which is not mentioned on their website but mentions on the “thanks for the purchase” email they send. Both of these items would have been nice to know ahead of time.

Just a little disappointed.

Purchased for my 1 year old and let me tell you he loves it. Every one loves it it’s very super duty. I’m 6’4 225lbs I ride in it with my son around our neighborhood and absolutely love it. Fun for adults and kids.

Bought an extra battery to extend our rides.

Car is big enough for my 7 and 3 year old to fit comfortably. Plenty of power for the two of them. Combined they are close to 95-100lbs. Have only had it for about 2 weeks, so far it’s been great. My kids love the radio and the fans.

I was very excited to be able to use a andquot;ripperandquot; between my grape vines behind my Kawasaki Mule as the Mule is narrower than my tractor. The attachment is very light and works more like a rake.

The andquot;liftandquot; is what gives this a neutral review. It doesn’t get the attachment high enough to clear rocks or 1andquot; sprinkler pipe! Hand cranking at the end of each row is a bit of a pain, but I knew that going in.

All in all, it was a $300 mistake, but worth a try.

Good design, fits well but shank made of cheap steel and bent after hitting first big root.

Love the roof. Fit great which made installation easy and quick. Really like the looks. And as always, the roof arrived in two days. Thanks Super ATV!

Very Easy to install along with all the other awesome parts and products from Super ATV! Only bad thing is the roof went on sale literally 1 day after it arrived at my house. 🤷🏼‍♂️

Heavy weight plastic. Easy to install. Looks great on my RZR. Very satisfied with this purchase.

When you take a close look at what you’re getting for the price you can’t go wrong with the Stallion. I spent a lot of time researching new and used utv’s but I always came back to BMS. I’m not trying to hype the product.

It’s just that there is so much more that comes standard on this utv that you pay extra for as an option on other utv brands. As for performance I’m still breaking it in. However, the few times I’ve pushed it it seems to have plenty of power.

I have several areas of steep incline on my property that I thought I would need a 4×4 but this thing climbs everything in 2-wheel drive. I have not experienced the negative issues listed in other reviews except for the shifting.

If you follow BMS’S suggestions and let it roll a little and use a soft touch on the gear shift it has worked every time. Overall, I’m pleased with the fit and finish, power and price. Thank you to the gentleman in one of the reviews for letting us know that the Wix WL10239 oil filter is the correct one to use.

I’ve experienced no buyer’s remorse and have actually been quite pleased with the purchase.

Purchased this side by side to haul yard litter (mostly limbs and such) to the back of my farm. It is pretty much as I expected. I have several friends that own different brands of side by sides and have driven many of them.

this BMS is very compatible with the Cam Am and Kawasaki. I don’t have it broke-in, so I can’t comment on performance yet. It does seem to have sufficient power at limited throttle and I expect it will do well.

The controls are fairly straight forward and easy to use. The only issue is the “hour” meter does not work and the speedometer is about 15% fast. Not sure if those items can be corrected as I have not contacted a dealer or the manufacturer yet.

Delivery was a little long (about 10 days). I did a good bit of research and I doubt that I could have gotten a better machine for the money. This thing is full equipped, radio, trailer ball two winches, lower doors.

roof, windshield, electronic controlled 4 wheel drive with differential lock. Nice machine.

To start Tractor Supply has been great trying to work between myself and BMS. With that being said I initially ordered the machine on 9/11 and did not receive it until the first of October. I also purchased the plow that BMS recommended for this machine.

From the day I got it home I have had nothing but trouble. To start the pulley and the pulley bracket broke on the plow, one of the windshield straps broke, the rear emblem on the tailgate fell off, I’ve had the smell of burning or hot breaks, there is cluncking noise behind the seats, the radio won’t hold any channels when you shut it off and turn it back on, it stalls at low idle going through the woods, I had to fix the driver door several times do to not latching and staying closed, I’ve had to jump it twice now due to a dead battery, with the most recent a couple days ago plowing snow the machine stalled and I had to tow it back up to the house, the front winch was not bolted to the machine, the winch won’t hold a tension.

When the plow is on, the winch slowly drops back down to the ground and won’t hold up the plow. It won’t even pull the machine forward on flat level ground. I contacted BMS and they sent a new emblem, pulley and bracket and the strap for the windshield.

When trying to work with BMS their tech support and services are very poor. Their representative put the blame on me stating “there’s only problems if you make problems” , rather than helping me find a solution.

He also said I could pick one problem to resolve. When I asked him if there was a service center in my area, I still haven’t heard back on that one yet. Finally Tractor supply contacted BMS and they stated they would send me a new machine which I have not seen yet.

It has been 3 months since I have purchased this machine and I have had nothing but trouble. When I get the new machine I will update my post with another review.