20 Best Wheels For E30 (2022 Updated)

The 11” wheels match my 9. 5” OEM wheels. Only had to trim a little plastic in rear of wheel wells and hairdryer heat and bend slightly for my 315ZR35-20 Nitto 555 G2 tires to fit. Did not need a spacer on my 3021 Scat Pack as some others said they needed.

I bought these as an extra set of rear wheels to mount my Drag Radials on my Challenger 1320 Scat Pack. I was worried they wouldn’t be a good match and they are literally identical to the factory OEM wheels.

So much so that it made me realize how dirty and faded my front wheels were, may have to buy two more. LOL.

I first wanted to buy these wheels because my old wheels were rusting badly due to the finish being scratched. When these wheels were delivered to my house the boxes didn’t give me confidence. My porch camera caught the delivery man dropping 2 of the 4 wheels on the my concrete steps.

My father heard them land and went to go check. The delivery man proceeded to place the last two wheels nicely on the porch. After he was gone we checked the wheels for damage. On each wheels there was at least 2-3 spots were the paint finish was scratched through and the steel was exposed.

I believe the delivery alone is not the only place they were treated poorly and damaged. I am disappointed with the wheels and plan on emailing to try and figure something out. I do not plan on using the set of wheels I got because of the damage they have sustained and the possibility of them rusting only months after I bought them.

These wheels look great. Considering the price, it’s hard to go wrong. I fitted these to my OBS ’99 Suburban K1500 and they fit perfect. The regular GM 6-bolt hub caps fit perfectly on these, too, and they look fantastic.

I got these as winter wheels for LT235/85R16 studded tires. Technically the 8″ width of the wheels is a little much for how narrow these tires are, but it works fine even if it looks a little odd. I wish the wheels were available in a 7″ width, but I knew what I was getting when I made the purchase.

Hopefully the finish lasts through at least a couple winters.

I recently bought the 15×10 steel off road rims. I am perfectly happy with the rims, their fit & function are great considering the cost per rim. however they arrived with some damage on the wheel lip’s due to the rims being packed in a substandard manner for shipping.

I’ve now spent like 3k plus dollars with rough country, I am happy with their products but I’m very disappointed with their packing/shipping procedures. I’d happily pay for shipping if it meant my products would arrive without being damaged.

That’s why I gave a 2 star rating. Great products…poor shipping procedures & standards.

I’m stuck having to purchase another jnc 026 wheel due to a tire blowing out and after replacing the tire coming to find out it had cracked on 3 spokes. No professional wheel repair shop would attempt the repair due to it being structurally unsafe at that point.

My advice is stay away from this type of wheel unless the vehicle is a show car or something that doesnt experience any bad roads. The wheel cracked after the tire blew out not because of a pot hole to make that clear.

Keep in mind those thin 5 spokes are the only support this style of wheel has.

Wheels finish coat is superbly done with meticulously crafted workmanship. Wheels were true and straight that allowed them to be easily balanced. Appears to be of decent quality and priced very reasonably.

I received several compliments after having the mounted for only a couple of days. I am very pleased with the quality finish and sporty deep dish design.

the color is way better in picture than in your hand. concave seems a lot deeper in photo than when you receive them. they are made good. one wheel.wasnt fully powder coated.

Mounted on 2016 a Camaro SS with 305/35 tires. Very well built and nicely packaged. They fit perfect with no rubbing, they do not stick out beyond the fender lip but are just about flush which is what I wanted.

A stock Camaro lug nut will not fit(too fat) and the Rotoform supplied center cap will not work in the rear of a Gen 6 Camaro (at least it didn’t on mine. ) Overall, I am very happy!!.

I received my wheels very quickly. Installed them in the driveway. Way too easy!! The price was fantastic and the quality is even better. My BMW service rep was impressed with the look and told me Rotiform wheels are a good value.

Amazing wheels! Came in just as described! Excited to put them on! Great color to go along with any black car! Can never go wrong with matte black!

I bought a set of four of these wheels for my 1969 Mustang Mach 1. I was very disappointed. The black paint was splattered all over the chrome part of the wheels. Very amatuerish. Looks like a 5th grader painted them.

The black paint is very rough and not finished well. The welds on two of the wheels are very rough. The rest of the car is very nice. These wheels are definitely not show quality and I will be sending them back.

I bought two of these bad boys, was so excited to get tires fitted and put them on the car, unfortunately one wheel was 100% flawless, and the welds are fantastic! The second wheel I wasn’t so lucky.

the black paint was scattered on the chrome finish and the welds on the back aren’t even finished, it looks like someone allowed a 5th grader to do the welds. VERY DISAPPOINTED and will be sending it back for a replacement.

I’ve waited long enough for these wheels to prove themselves. I’ve had these for 70,000 miles and officially 10 years later this year. The clearcoat applied has survived 9 salty midwest winters and the finish is tougher than any aftermarket wheel I’ve seen to date.

They’re very scratch resistant, I can wipe road salt, oil, mud, brake dust, etc. off with a dry rag and reveal the still-new looking finish underneath. It helps to be careful when taking the lugnuts off and on.

Many impact wrenches/sockets might wobble and hammer the finish around the stud holes. Another thing to be aware of – larger diameter lugs fit in the wheels, but a socket might just barely grab the outside near the center cap.

Smaller diameter lug nuts (like spline drive) might save a little room and time during tire installation/rotations. These spent a lot of time off-road and daily abuse on road and I’m finally noticing some blemishes.

I can’t speak for the other Dick Cepek model wheels , but if they make the DC-2 today as good as they did in 2011. Yeah, I’d definitely buy them again.

Without fake bead lock holes. I cant stand fake bead lock holes or fake bolts. These look amazing. I was concerned for a second on the center hole of the wheel clearing the 4×4 hubs on the K5. Fits like a glove.

I double checked the backspacing before I bought the wheels. What i did discover is that these wheels are going to require spline drive lug nuts. Not a big deal.

Bought these wheels about a month ago and I am happy with the way they look. They add a nice aggressive look for an older truck. What I am not so happy with is how much trouble I went through with shipping and the odd ball wheel inside diameter for hub centric rings, havent been able to find any yet.

So far they have an atrocious vibration while driving at 50 mph and above even after installing fresh front suspension parts, balancing and alignment. I’ve also installed all new front and rear shocks as well.

Hopefully I can diagnose the vibration soon and get that sorted out, not quite sure if it’s the wheels yet or new tires. Anyone have vibration problems with Nitto Ridge Grapplers? 265/70/16.

Short term: the chrome is very brilliiant and appears to be of good quality. The black paint could have been masked off better. Some slightly uneven lines and areas that needed minor touch ups. Long term: Have only owned a few months.

Not sure of long term drability at this time.

Excellent product. Cant wait to put on my 1969 Mustang and made in the U.S.A. is why I bought these.

Light weight and agile. They are strong and can withstand rough bumpy terrains. They look great on my mini. I recommend spraying them with a couple of clear Diplo protective coats. It helps keep the paint from chipping away over time.

I was looking for some nice wheels to go with my red 86, & I’m quite happy that I decided to go with these. They just look great on it, plus was able to get them a little cheaper too with the coupon’s that summit always seem to have for big purchases.

Only down side I could say is that one of the rims seem to have a light scratch on it that you can barely notice, but that could of easily happened when I was getting them mounted on the car. Overall happy with my purchase.

I bought these for an MGB-GT we are building for 24 Hours of Lemons. Beautiful wheels. The challenge is the hub caps. They are two shallow. My hub pushes them off. Rear end is from a ’78 MGB. Summit sent me to Konig for help.

Konig was no help. they said search on line forums for a solution. This is good support?.

Bought these for my 85 300zx, and I gotta say I get a lot of compliments with these wheels! I would recommend these for any older Z car enthusiast!

These are very nice looking wheels, but the cost seems to be high compared to other manufactures and they are not very good for everyday drivers. I had to have them balanced several times trying to get them to not cause a vibration in the car.

Never was balanced true and i hit a small pot hole and bent a front wheel on two different occasions. Tried to get one of the wheels straitened but could not balance. Very expensive to replace after bending a wheel on a small pot hole! Definitely a great wheel for drag racing just not strong enough for street use.

These wheels are really nice quality as Weld wheels are. On the Weld website they said they would fit 98-02 camaro with a 1/4 inch spacer. They did not fit that way on my 02 SS. I had to use a 5/16 spacer and grind the edge of the brake calipers.

After that they fit nice tucked under the fender. I also had to use a 1inch length shank because of the spacer.

Absolutely beautiful, well made (made in USA),cool wheel! Thoroughly pleased and impressed with the look and quality. I was looking for a wheel that I liked that would allow clearance for my Wilwood disc brakes.

The different pad heights of the S71 and the awesome looks (and affordability) made this wheel the obvious choice. Awesome wheel Weld – great job! And, as always, Summit customer service excelled with quick shipping and even took care of a center cap issue in record time.

It took some time to save up for these wheels and it was nice to know I’d be taken care of with a reputable manufacturer and supplier.

Great looking wheels. Mounted them with 275/40-19’s, and they were about 6 lbs lighter per corner than my stock 18×8 wheels with 235’s. Note that if running the 19×9. 5 square, you will need a small spacer for clearance up front.

5mm seems to work.

Great quality. And ride comfort. Overall great fitment and changed the look of the car. Simple installation or take them to a Reputable tire shop And riding clean within a hour or two.

Love the rims. It’s a great fit. Looks great. Love the look.

Does one even need a review? Just check out the beauties on my bikey, they are money well spend. Zip zip and buzz buzz. *picture not loading. lame. well. imagine it. Huuuuuuge upgrade to my bike. they rip.

handle chunk and rock. engage on a dime.

These guys got me a great set of second rims, to my specs, fully built with tires and everything with the price I wanted. Great service couldn’t ask for anything better. They roll great.

These wheels track where you turn the handlebar. Yes, you’ll get more vibrations but it’s worth being able to turn in such a quicker and more accurate manner. The craftsmanship on the carbon rims are amazing and the industry nine engagement is very solid.

wheels come very well packaged with valve stems and center caps. thing that you will need to fit this wheels are baer 15″ wheel conversion brakes and short shank lung nuts. reason it gave four start instead of 5 is due to the part of how much material is needed to be removed from lower part of rear knuckle, i personally decided to install 10mm spacers and ARP extended lug studs to minimize removing of material.

once fitted they are flush to the body line and fit amazing.

These wheels look great- Light weight and yet substantial. Got the short shank lug nuts. Wrapped them with Mickey Thompson 28″x 11.5″ Bias ply and they fill out the wheel wells perfectly.

These wheels are so much lighter than most wheel options out there! the finish of them is also amazing! weld knows how to make an amazing wheel and these are no exception! don’t forget you need a shank style lug nut and your factory ones will not work.

SC should be embarrassed for letting these out of the truing stand in this condition. Now I need to go pay a local wheel builder to properly tension and true these.