20 Best Wood For Building (2022 Updated)

No glue connectors required, simply stack wood planks to create buildings, monuments and geometric forms. It’s the ideal activity to help kids gain an understanding of balance and proportion, as well as an interest in architecture, building design.

A 24-page, full-color idea booklet with build-out instruction is also included.

Live Edge Plank that is Ideal for Wood burning and Chip Carving Use for Home Accents, Rustic Weddings, Making a Base or Many Arts & Craft Projects Sold by Width Increments and will Vary from 9″ to 13″ Wide Approximate Size 16-Inches Long by 12 to 14-Inches Wide by 1-5/8-Inches Thick Made in Wisconsin, USA Included Components: 1 Basswood Plank.

The classic American blonde, Hard Maple features creamy white sapwood with a reddish cast, and rugged durability. The wood has an exceptionally fine, even texture, and tight pores that yield an excellent finished surface.

These thin boards are machined S4S to 1/8″ and 1/4″ thicknesses, eliminating wear and tear on your planer. You won’t have to worry about chipout, which is difficult to prevent when planing thin stock.

Thin boards are ideal for edging, veneering, inlay, marquetry, sides for decorative boxes, bending stock, bent laminations and whatever else your imagination can dream up! Tree: May reach a height of 70 to 120 feet, with a 24 to 36 inch diameter trunk.

Sapwood Color: White with a reddish cast. Heartwood Color: Uniformly pale reddish brown or light tan. Grain: Usually fairly straight, but can also be curly or wavy. Sometimes exhibits decorative figuring like bird’s eye, maple burl, blister, leaf, and fiddleback.

Texture: Very fine and even. Working properties: Due to hardness, tools must be kept very sharp. Carving: Responds well to carving tools. Steam bending properties: Fair. Strength Properties: Very high bending strength.

Resistance to compression parallel to the grain is high. Hardness is rated as medium. It is heavy, and resists denting and marring. Hard Maple can be up to 25 percent harder than Soft Maple.

A long time favorite for its rich color and excellent workability, Cherry continues to gain popularity for use in fine furniture and cabinets. The wood leaves the sawmill with a pinkish, rosy tone, and continues to darken over years to a deep, lustrous red.

The narrow sapwood has a creamy color, similar to Hard Maple. Cherry is easily worked with hand tools and takes an excellent finish and polish. All boards are machined S4S, and are planed to 1/8″, 1/4″, 1/2″ and 3/4″ thicknesses, relieving your planer of excess work.

Thin boards are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations, while the thicker boards are ideal for furniture, paneling, cabinet doors, mouldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up! Distribution: As many as five varieties of Black cherry are reported to thrive throughout North America.

Tree: Attains heights of about 100 feet (30 m) Average tree grows to about 80 feet (24 m) in height, and produces a tall trunk, about 24 inches (60 cm) in diameter. Cherry trees are usually large enough to harvest after 35 to 40 years.

Full height is attained in about 100 years. Light & Air-Induced Changes: Black cherry is very sensitive to UV light, which causes it to darken over time. UV light inhibitors in coatings can be used to prevent color change.

Grain: Fine grain. Material with dark wavy streaks are frequent. Quartersawn lumber has a shimmery appearance. Texture: Fine and uniform. The wood often has narrow brown pith flecks and small gum pockets.

Luster: Rich and satiny. Odor: Emits a fruity aroma when cut. Steam Bending: Good. Often compared to Beech and Ash.

These 6-foot-long shiplap boards from UFP-Edge look like rustic, salvaged barn wood. But theyre made of new lumber. The surface has been distressed to look aged and weathered. Then, the boards are primed and painted light brown to look like authentic reclaimed barn wood (but much cleaner!).

The surface is textured and feels rough. Board have square rabbeted edges that overlap for a true shiplap look. Ends butt together. Intended for indoor use only. Note that because of woods natural characteristics, the color will vary from board to board.

If your project requires a consistent color, order 10% more boards than youll need.

Our basswood lumber is ideal for building the frames on your custom-made plantation shutters. All stock is pre-planed to the appropriate 1-1/16” thickness. For stiles, buy the 2-1/4” wide stock. For rails, the stock width will vary depending on the height of your louvered panel.

In many cases, you’ll want to buy the 5” stock for the rails, and rip it to the width you need. Use our Design Wizard to generate a cut list for your project, then buy lengths slightly longer than you need and trim to the exact length.

Features: All of our basswood lumber is premium-grade stock (FAS Grade First and Seconds)Surfaced smooth on both faces (S2S) so planing is not required – Guaranteed to be free of defects on at least one face and two edges – Kiln-dried to 7% to 8% moisture content – Planed to 1-1/6” thick—perfect for shutter frames – May be used for numerous other projects as well | Rockler Basswood Lumber by the Piece, 5″W x 60″L x 1-1/16″ thick.

Our basswood lumber is ideal for building the frames on your custom-made plantation shutters. All stock is pre-planed to the appropriate 1-1/16” thickness. For stiles, buy the 2-1/4” wide stock. For rails, the stock width will vary depending on the height of your louvered panel.

In many cases, you’ll want to buy the 5” stock for the rails, and rip it to the width you need. Use our Design Wizard to generate a cut list for your project, then buy lengths slightly longer than you need and trim to the exact length.

Features: All of our basswood lumber is premium-grade stock (FAS Grade First and Seconds)Surfaced smooth on both faces (S2S) so planing is not required – Guaranteed to be free of defects on at least one face and two edges – Kiln-dried to 7% to 8% moisture content – Planed to 1-1/6” thick—perfect for shutter frames – May be used for numerous other projects as well | Rockler Basswood Lumber by the Piece, 2-1/4″W x 60″L x 1-1/16″ thick.

Bocote (Cordia spp. ) has a yellowish brown body with dramatic dark brown to almost black stripes. Color tends to darken with age. The grain patterning can be quite striking, particularly on flatsawn areas.

It’s not uncommon to see many “eyes” and other figuring in bocote; though unlike knots, they do not seem to present any special challenges in machining. Some species may contain silica that will dull cutters.

On the whole, bocote is easily worked and machined with good results. Although bocote has a fairly high amount of natural oils present, gluing is usually problem-free. Bocote also turns and finishes well.

Common uses include fine furniture, cabinetry, flooring, veneer, boat-building, musical instruments, gunstocks, turned objects, and other small specialty wood items. Most species come from Mexico and Central/South America, though certain species occur in Africa.

This micro-thin stock is cut to size from quality, kiln-dried stock. 100 percent clear and sanded on both sides. Dimensions are +/- 1/8 inch. Grain runs with the longest dimension.

Noglueortoolsarerequired – justsnaptheinterlockingtilestogether. Canbeusedforindoororoutdoorsettings. Perfectforaentryway, mudroom, deck, terrace, showers, bathrooms, poolsoranywhereinbetween.

There are so many amazing ways to use Weaber barn wood wall panelling to achieve a spectacular decorative rustic reclaimed wood look in your home. The barn wood wall appearance has been used time and time again.

The unique beauty of reclaimed wood is totally timeless and can be used in different parts of the home.

Basswood surface with no pitch or grain to interfere with finishing techniques, such as wood burning. Basswood is the best wood species for successful wood burning and wood carving. The straight edge adds a modern and sleek look.

This plaque is ready to paint, stain, wood burn, or wood carve. 6 x 8 x 0. 75″Made in America. Professionally kiln dried. Sanded smooth and ready for any finish.

Our Rustic Collection is an instant classic. Our Rustic wood millwork utilizes the technologies of today to build the ‘log and timber’ wood products that have been in architecture for centuries. Because our products are not kiln dried, each item in our Rustic Collection is 100% unique and will contain the natural variations that the wood species offers.

Your wood bracket, corbel, rafter tail, will contain unique colors, grains, textures, knots, sapwood & heartwood content and possible sap bleeding, and even natural checking, splitting & cracks. These natural variations are what make the Rustic Collection stand out from the rest.

Be proud of your project; stand out from the cookie-cutter homes; use the Rustic Collection family of products.

Stylish and durable 3/4 in. x 5-1/2 in. White Shiplap provides a modern clean look as well as a country rustic design with the addition of the nickel gap. Boards are primed and ready to be painted. Boards are made from Paulownia, which is lighter than Pine, making it easy to handle, but also the species is a hardwood that resists rot and termites.

Give your room or outdoor space a clean and modern look or a country rustic farmhouse feel with Kimberly Bay Nickel gap.

Our Rustic Collection is an instant classic. Our Rustic wood millwork utilizes the technologies of today to build the ‘log and timber’ wood products that have been in architecture for centuries. Because our products are not kiln dried, each item in our Rustic Collection is 100% unique and will contain the natural variations that the wood species offers.

Your wood bracket, corbel, rafter tail, will contain unique colors, grains, textures, knots, sapwood & heartwood content and possible sap bleeding, and even natural checking, splitting & cracks. These natural variations are what make the Rustic Collection stand out from the rest.

Be proud of your project; stand out from the cookie-cutter homes; use the Rustic Collection family of products.

Can be painted, stained, or varnished. Diameter of leg: 2-1/8″. Includes a pre-installed 5/16″-18 bolt. No. 2406: leg height: 6″, leg diameter: 2-1/8″, material: pine, pkg qty: 1, package type: hang tag no.

2409: leg height: 9″, leg diameter: 2-1/8″, material: pine, pkg qty: 1, package type: hang tag no. 2414: leg height: 14″, leg diameter: 2-1/8″, material: pine, pkg qty: 1, package type: hang tag no. 2421: leg height: 21″, leg diameter: 2-1/8″, material: pine, pkg qty: 1, package type: hang tag no.

Our Rustic Collection is an instant classic. Our Rustic wood millwork utilizes the technologies of today to build the ‘log and timber’ wood products that have been in architecture for centuries. Because our products are not kiln dried, each item in our Rustic Collection is 100% unique and will contain the natural variations that the wood species offers.

Your wood bracket, corbel, rafter tail, will contain unique colors, grains, textures, knots, sapwood & heartwood content and possible sap bleeding, and even natural checking, splitting & cracks. These natural variations are what make the Rustic Collection stand out from the rest.

Be proud of your project; stand out from the cookie-cutter homes; use the Rustic Collection family of products.

Our Rustic Collection is an instant classic. Our Rustic wood millwork utilizes the technologies of today to build the ‘log and timber’ wood products that have been in architecture for centuries. Because our products are not kiln dried, each item in our Rustic Collection is 100% unique and will contain the natural variations that the wood species offers.

Your wood bracket, corbel, rafter tail, will contain unique colors, grains, textures, knots, sapwood & heartwood content and possible sap bleeding, and even natural checking, splitting & cracks. These natural variations are what make the Rustic Collection stand out from the rest.

Be proud of your project; stand out from the cookie-cutter homes; use the Rustic Collection family of products.

All of our Basswood is kiln dried down to a consistent 8 – 10% moisture content to avoid cracking or “checking” to produce consistent buttery smooth carving. Avoid the frustration of kits selling woods unsuitable for carving.

Our wood carving kit is 100% Made In The USA. Don’t be fooled by some selling imported wood blocks. BIGGER IS BETTER. Our Kit Contains more than 25% usable wood than our competitors Kits. Sizes included in the kit include.

2 blocks measuring 2″ X 2″ square and 5 inches long. 4 blocks measuring 1″ x 1″ and 4 inches long. 6 blocks measuring 1″ x 1″ x 6″ long BASSWOOD WOOD CARVING SET MAKES A PERFECT GIFT FOR THOSE BOTH NEW OR EXPERIENCED AT CARVING OR WHITTLING.

Basswood is an ideal wood for many woodcarvers. Its soft, fine, even texture make it easy to work with, while its pale, inconspicuous color doesn’t detract from the carved patterns of the finished product (which also makes it easier to paint and color).

BIGGER IS BETTER. Our Kit Contains more than 25% usable wood than our competitors Kits. More usable wood plus the safety of a better hold either by hand or vice. Sizes included in the kit include. 2 blocks measuring 2″ X 2″ square and 5 inches long.

4 blocks measuring 1″ x 1″ and 4 inches long. 6 blocks measuring 1″ x 1″ x 6″ long. SATISFACTION GUARANTEEAvoid the frustration of kits selling woods unsuitable for carving and finishing. Basswood is known for being easy to work, being very soft and light.

Perhaps one of the most suitable wood species for hand carving. Finishes and glues easily for ultimate workability. Our 100% genuine Wisconsin basswood is grown and sustainably harvested.

A long time favorite for its rich color and excellent workability, Cherry continues to gain popularity for use in fine furniture and cabinets. The wood leaves the sawmill with a pinkish, rosy tone, and continues to darken over years to a deep, lustrous red.

The narrow sapwood has a creamy color, similar to Hard Maple. Cherry is easily worked with hand tools and takes an excellent finish and polish. All boards are machined S4S, and are planed to 1/8″, 1/4″, 1/2″ and 3/4″ thicknesses, relieving your planer of excess work.

Thin boards are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations, while the thicker boards are ideal for furniture, paneling, cabinet doors, mouldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up! Distribution: As many as five varieties of Black cherry are reported to thrive throughout North America.

Tree: Attains heights of about 100 feet (30 m) Average tree grows to about 80 feet (24 m) in height, and produces a tall trunk, about 24 inches (60 cm) in diameter. Cherry trees are usually large enough to harvest after 35 to 40 years.

Full height is attained in about 100 years. Light & Air-Induced Changes: Black cherry is very sensitive to UV light, which causes it to darken over time. UV light inhibitors in coatings can be used to prevent color change.

Grain: Fine grain. Material with dark wavy streaks are frequent. Quartersawn lumber has a shimmery appearance. Texture: Fine and uniform. The wood often has narrow brown pith flecks and small gum pockets.

Luster: Rich and satiny. Odor: Emits a fruity aroma when cut. Steam Bending: Good. Often compared to Beech and Ash.

Plywood sheathing is ideal for residential and light construction. Every piece meets the highest grading standards for strength and appearance. It adds proven performance and durability to new homes, room additions and renovations.

Plywood sheathing delivers outstanding stiffness, strength and versatility. It is an excellent choice for light frame wall and roof assemblies in weather protected applications.